Panduit PTR3E manual Service Mode Test Print Mode, Priority Setting Command LCD

Page 41
INITIALIZING ROM V00.00.00.00
TEST PRINT MODE
CONFIGURATION
TEST PRINT SIZE 10 CM
Note: This display does not appear when a Memory Test Print is chosen. Only a small Memory Test Print label can be printed.
PRESS FEED KEY TO STOP PRINTING

PRIORITY SETTING COMMAND LCD

This selection allows the user to assign a priority for Print Darkness, Print Speed and Print Offset.

1.Use the LINE key to step to the desired priority. If LCD is selected, the setting established via the LCD display/menu system will be used for an incoming label job, regardless of any different command settings. If Command is selected, any commands in the label job will take precedence and be used for printing the job and the LCD Display will reflect the new setting.

2.Once the desired setting is selected, press the FEED key to accept the setting and step to the next display.

SERVICE MODE

TEST PRINT MODE

The Service mode is exited by powering the printer off and then back on.

The Test Print Mode offers five different printer status labels for troubleshooting. If DSW3-5 is On, the Test Print cycle must be initiated with a Print Start command.

This option allows you to print a test label. It is recommended that you print a test label after have changed any of the settings in the Advanced Mode. The test label allows you to verify that you indeed did make the desired changes. To enter the User Test Print Mode, power the printer on while pressing the FEED key. The printer will beep. Release the FEED key and the printer will display the Test Print Mode message on the LCD panel:

1.Use the LINE key to step the underline cursor to the type of test labels you wish to print. The choices are:

Configuration Bar Code Head Check Memory Factory

Once you have selected the type of test label to be printed, use the FEED key to accept the selection and the display advances to the Test Print Size display. This display allows you to select the label width.

1. Use the LINE key to select the label width. Each time the LINE key is pressed, the label size advances 1 cm until it reaches a maximum width of 10 cm, at which point it will wrap to the smallest size of 4 cm.

2.Pressing the LINE key accepts the selection

3.Press the FEED key to start printing test labels

continuously.

4.Press the FEED key to stop the printer.

5.To exit the Test Print Mode, power the printer off

and then back on.

33

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Operator and Technical Reference Manual Panduit PTR3E Safety Practices Information to User Warranty Information PTR3E Operator Manual Table of Contents IEEE1284 Parallel Interface RS232C Serial Interface Page Introduction Section Printer OverviewSpecification PTR3E General Printer SpecificationsPotentiometer Adjustments Matrix Fonts Character FontsMSI Postnet UCC/EAN-128 BAR CodesPhysical Power RequirementsSection Installation Here,butarethe OperatorManual ExtraRibbonCore Door Follow these steps to properly load labels into PTR3EPage Sensor Loading THERibbonSpindleRIBBONRewind Page Label Use Page Page Label Sensor Adjustment Printer Set Up DIP Switch PanelsOFFON123DSW245678 Mode Selection Print Speed Adjustment DSW2-8 . SeeRepeat Print via Ex er ExternalProtocol Selecti Default S Tti gsPrinter Adjustments Print Speed InitializingOnline QTY000000 Offline ± 00mm Pitch OffsetInitializing ROM Advanced Mode Zero Slash YES no Auto Online Ignore CR/LF YES no Print OffsetService Mode Character Pitch Prop Fixed Advanced ModeAdvanced Mode Service Mode GAP InputFORWARD/BACKFEED Distance Default Auto Online Feed YES no Feed on Error Reprint W/FEEDFORWARD/BACKFEED Distance XXXmm Euro Code Select Language EnglishPriority Setting Command LCD Service Mode Test Print ModeDefault Setting YES no Default Setting ModeDefault Setting Completed Initializing ROMPotentiometer Adjustments HEX Dump ModeInitializing ROM Online QTY000000 PitchPrint Backfeed OffsetDisplay Maintenance Mode DIPSW2-4 ON-OFF Factory ModeDisplay Counter Values Counter Clear NonePage Darkness Print ProceduresAdjusting the Print Quality Print,thedarkness Cleaning the Print Head and Platen Cleaning the Print HEAD, Platen and RollersCleaning the Rollers and Guides Cleaning the SensorsReplacing the Print Head Open the Top and Side Access doorsThed,centeritwill Supplies needed Replacing the FuseCleaning and Maintenance IEEE1284 Parallel Interface Electrical SpecificationsInterface Types RS232C Serial Interface General SpecificationsUsing the IEEE1284 Parallel Interface Initial ChecklistTroubleshooting Using the RS232C Serial InterfaceLED LCD Audible Error Condition To Clear Message Beep Error Signals

PTR3E specifications

The Panduit PTR3E is a key player in the realm of cable management and network infrastructure solutions, designed to meet the evolving demands of modern telecommunications and data center environments. This innovative product is part of Panduit's extensive lineup, which is known for robustness, efficiency, and versatility.

One of the standout features of the PTR3E is its exceptional modular design. This modularity allows for straightforward installation and easy reconfiguration as network demands change. The PTR3E supports a wide array of mounting options, making it suitable for various installations, from wall-mounted system configurations to versatile rack setups. This flexibility ensures that it can fit seamlessly into existing infrastructures while providing the capability to scale efficiently.

Another significant characteristic of the PTR3E is its use of advanced materials. Constructed from high-quality, durable plastics, it offers excellent resistance to environmental factors including temperature variations and humidity, which are common challenges in data centers and network closets. This resilience not only increases the lifespan of the product but also minimizes maintenance costs and downtime.

In terms of technology, the PTR3E is engineered to support high-density fiber and copper cabling solutions. It can accommodate a variety of cable types, ensuring compatibility with different systems and reducing the clutter that often hampers network efficiency. The intelligent design features integrated strain relief and cable management capabilities that help in organizing cables without imposing undue stress on connectors and ports.

Moreover, the PTR3E is designed with user operation in mind. Its intuitive design facilitates easy access to cables and ports, allowing for quicker troubleshooting and upgrades. This accessibility is critical in fast-paced environments where time is of the essence, making it a preferred choice for IT professionals.

Furthermore, the PTR3E adheres to the latest industry standards, ensuring compliance with regulatory requirements. This reliability is crucial for organizations that prioritize system integrity and performance. With the integration of Panduit's technology, the PTR3E not only enhances operational efficiency but also aligns with sustainability goals, reducing environmental impact in systems design.

In conclusion, the Panduit PTR3E is a versatile, durable, and technologically advanced solution for cable management in today’s fast-paced networking environments. Its modularity, high-quality materials, and thoughtful design make it an essential component for any organization looking to optimize its network infrastructure.
Top Page Image Contents