Pentax IC-360 manual Configuring Administrator’s Data at the Homepage, System Configuration

B. Configuring Administrator’s Data at the Homepage

1) System Configuration

You can set the date & time, name, location, and description on your VersaCam. The model and serial number appear automatically.

Date & Time: There are three date

&time menus. In the ‘VersaCam Current Date & Time’ panel, the current date and time of the VersaCam’s clock is displayed. In ‘System (PC) Current Date & Time’ panel, the date and time of the clock in the administrator’s PC is displayed. The administrator may reset the camera’s clock with the PC’s date and time by clicking the ‘Time Synchronization’ button. In ‘Manual Date & Time’ panel, the administrator may set the date and time to any desired value. The administrator then sets the camera date and time by clicking the ‘Time Synchronization’ button.

Administrator’s E-mail Address: In this panel, an administrator may set up an E-mail address. If an administrator puts a contact E-mail address link on the VersaCam homepage, the linked E-mail address is synchronized with it.

This is so the administrator can easily maintain E-mail addresses without modifying the HTML page.

Initialize Flash Information: The administrator can initialize almost all the information saved in flash memory by using ‘Factory Setting’. However, ‘Date & Time’, ’Model’, and ‘Serial Number’ in the ‘System’ menu, ‘IP configuration’ in the ‘Network’ menu, and all items in the ‘Video’ menu cannot be initialized. Also, Preset Position, which is configured in the Factory Setting, cannot be initialized.

Rebooting: If the VersaCam IC Series has any problem, the administrator can reboot it without manually disconnecting the power supply. This button works as a reset switch.

21 VersaCam IC-360 User’s Guide