4) Security Configuration
This page allows you to control accessibility to the VersaCam with IP addresses.
If ‘IP/Subnet Filtering Mode’ is enabled, access can be granted or denied to users based upon their IP addresses. By specifying unique addresses (e.g., 204.131.189.217), access from those addresses may be controlled. If a user’s IP address is not included specifically to “allow” access, even a correct user name and password will be insufficient to gain access. Likewise, even if in possession of a valid username/password, any user whose IP address is found to be specifically listed to “Deny,” no access to images will be allowed for that user. “Unauthorized IP Address” will appear in the viewer window.
The administrator may restrict users from receiving images from a VersaCam, even though they are able to access it. If ‘Image Encryption Mode’ is enabled, and a pin number is assigned, users must key in the assigned pin number to see the image after accessing VersaCam image viewers.
‘Security Configuration’ may be used as a second security layer to control accessibility in addition to utilizing ‘User Account Configuration.’
25 | VersaCam |