Pentax IC-360 manual Video Configuration, Video Channel State Control, Camera Color Type

Page 32

5) Video Configuration

This page allows configuration of every channel with various conditions.

(1) Video Channel State Control

The administrator decides whether to utilize the video signal from a particular video channel of the VersaCam. For the IC-360 model, there is only a single video channel available, so this button serves only to enable or shut down this channel.

(2) Camera Color Type

This button is used to define whether the camera internal to the IC-360 is a color or black & white camera. At this time, ALL IC-360 units employ color cameras. Therefore, this setting must be left in the “Color” position.

(3) Video Signal Type

This button is used to define the type of internal CCD module and external CCD cameras (not available on the IC-360) as either ‘NTSC’ or ‘PAL’ format. As the VersaCam IC-360 cameras are built as either one or the other, this setting should not be changed.

(4) Camera Installation Angle

This feature allows for automatic image rotation for cameras that are not installed “right side up.” The IC-360 model can be installed base up on a ceiling (where this option is set to “Normal”) or with the base down on a table or other surface with the dome pointing up (where this option is set to “180 deg”).

(5) Advanced Configuration

By Clicking ‘Advanced Configuration,’ you may access the page where advanced configuration details can be set.

Calibration Parameters

The administrator may manipulate the image by adjusting brightness, contrast, hue, saturation, horizontal line shift, and vertical line shift from this menu. The default setting for all controls is “0.” Immediate feedback of the results of each change is available in the image viewing area after confirming that the administrator wishes to make the change by clicking the “Apply” button at the bottom of the page.

Caption Display Options

The administrator can set the default captioning information to be displayed, if any, on the transmitted image.

26	VersaCam IC-360 User’s Guide

Image 32

Contents VersaCam IC-360 User’s Guide VersaCam IC-360 User’s Guide FCC Compliance Statement Important Notice Contents Appendix 2 Frequently Asked Questions Introduction What is a VersaCam IC-360?Features and Benefits VersaCam IC-360 User’s Guide VersaCam IC-360 Overview and Description Camera Kit ContentsII. Product Descriptions Pin Name Description Connector Name Description RemarksDescriptions of Ports RS-232 and Digital Input Malfunction Indications Description of LEDsSummary Terminology Connecting a VersaCam IC Series to a PC Connecting a VersaCam IC Series to a PCConnecting a VersaCam IC-360 to the Internet or a LAN IP Address Assigning Methods Configuring Administrator’s Data Assigning a VersaCam’s IP AddressVerifying Installation Assigning an IP Address with the ARP CommandUsing ARP in Windows VersaCam IC-360 User’s Guide Login ID and passwordStarting a Web Browser Behind a FirewallVersaCam IC Series Active-X for MS Explorer Users FAQVersaCam IC Series Plug-in for Netscape Users Video Information Setting Configuration of the High Quality Image AreaViewing With The VersaCam IC-360 Useful Pop-up Menu on the Real- time monitoring screenFocus sensitivity Image qualitySave File As Real-time monitoringPan/Tilt/Preset Control 720x486 ViewerResolution Gray ModeSingle Shot Mode Server Push ViewerAdmin ZoomFocus Acceleration RateAccessing through the Setup Program VI. Configuring Administrator’s Data at HomepageAdministrator Login Configuring Administrator’s Data at the Homepage System ConfigurationUser Configuration Network Configuration Ethernet Interface XDSL InterfaceSecurity Configuration Video Configuration Video Signal TypeCamera Installation Angle Advanced ConfigurationVersaCam IC-360 User’s Guide Application Configuration Mail Event ConfigurationRecipient E-mail Address Sender’s E-mail AddressIMG-CHnn-SNx.eye, where FTP Configuration Pan/Tilt/Zoom Control Panel VersaCam IC-360 User’s Guide Pan/Tilt Reverse Mode Function Mode SelectionInternal Settings Serial Port Configuration Digital I/O Configuration Alarm Configuration Alarm Parameters for E-mail / FTP ApplicationAlarm Preset Motion Detection ThresholdViewer Editing Video Server TCP PortSelect Main Goto Viewer CCD Camera Appendix 1 Detailed Specifications of VersaCam IC-360General Lens Specification Pan/Tilt SpecificationNetwork MechanicalAppendix 2 Frequently Asked Questions Frequently Asked QuestionsWhat is the maximum transmission speed? Is there any limitation to login name and password length? What is maximum acceptable length of network cable?VersaCam IC-360 User’s Guide VersaCam IC-360 User’s Guide VersaCam IC-360 User’s Guide VersaCam IC-360 User’s Guide VersaCam IC-360 User’s Guide Delete the existing MRJ packages folder VersaCam IC-360 User’s Guide Html VersaCam IC-360 User’s Guide Appendix 3 Utilizing IP Addresses on a Local Network IntroductionIP construction and Network class Class NetworksTo use as two remote networks 1/2 + 1/2 Sub-Network ID Appendix 4 Updating VersaCam IC-360 Firmware Connect VersaCam 360 to a PCUpgrading firmware with the upgrade program VersaCam IC-360 physical installation procedure Appendix 5 VersaCam IC-360 Physical Installation GuideContents VersaCam IC-360 User’s Guide Appendix 6 VersaCam IC-360 Power Supply Installation Guide Checking the Package ContentsPower Supply Specification Model PW-160 Adapter Cable View Connection DiagramVersaCam IC-360 User’s Guide RS-232 Connector Connections and ConnectorsPowering External Sensors