(2) Ethernet Interface:
An administrator may configure the IP address, subnet mask, broadcast address, gateway address, and DNS addresses of a VersaCam. The administrator may set the broadcast address automatically by clicking the ‘Get From Netmask’ button after assigning an IP address and subnet mask. An administrator may also, depending on the network type, set the data packet size with ‘Select MTU Size’ to utilize the network more effectively.
When the addresses are not assigned properly, users cannot access a VersaCam from any local or remote network. Even on the local network, a user is not able to access the camera if the administrator does not assign a proper IP address to the VersaCam.
(3) xDSL Interface
If a VersaCam is connected on an xDSL line that requires a PPPoE process, the administrator should select ‘xDSL (PPPoE)’ and configure the ID and password for PPPoE. The ID and password may be acquired from the ISP that installed the line. The VersaCam may get an IP address when it is connected to the xDSL line.
24 | VersaCam |