Peavey GT Group XLR, Matrix Pre/Post, Fader Reverse w/LED, EFX Return Scene Mute Assignments, Bus

Page 21

CENTURY SERIES

SP / TC / GT

Group Assignments

Assigns the group signal to the Left, Right, and or Mono out- puts.

Group XLR

Turns on the balanced XLR output.

Matrix Pre/Post

Switches the Matrix sends between pre and post-fader settings.

Fader Reverse w/LED

Swaps functions between the Effect Level control and the group fader; i.e., one becomes the other and vice versa.

Group PFL

Allows for Pre Fader Listening of the Group signal.

Group Peak & Signal LED’s

The red LED indicates that the group signal is within 3dB of the clipping point.

The green LED constantly displays the level of group signal activity by varying in intensity.

Group Fader

Controls all post-fader group signal outputs.

EFX Return Scene Mute

Assignments

Assign the EFX return signal to any of the four scene mute groups. Scene mute combines with the effect’s local mute but- ton, and actuates the local mute LED.

EFX Return Scene Mute Safe Switch

Disables all selected EFX scene mute assignments. An associ- ated green LED indicates the return is in a safe state.

GROUP OUT

GROUP INSERT

EFX RETURN

-10 +4

BUS IN

Rear Connections

Group Out

This connector carries the post-fader output signal from the associated group module.

Group Insert

This jack allows for the insertion of an effect or signal processor into the audio path of the associated group.

EFX Return

These two connectors allow for effect signals to be brought back into the board. The 1/4" TRS jack accepts a balanced or unbalanced signal at -10 dB level and delivers the signal to the EFX return section. The female XLR connector accepts a balanced signal at +4dB level and delivers the signal to the EFX return section of the group.

Bus In

This connector accepts a balanced signal at +4dB level, and then sums it with all the other signals assigned to the associated groups.

PAGE 19

Image 21
Contents SP TC GT Crest Audio Inc Table of Contents Feature Overview Input XLR Output XLR Wiring ConventionsCentury Series Console Power Supply To Console Power ConnectionsSystem Connections Signal Processors SP Input Module Rear Connections TC Input Module Polarity Reverse SwitchHF Equalizer Control MID EQ Level and Sweep ControlsPAN Control PEAK/SHELVE LF Switch PEAK/SHELVE HF SwitchGT Input Module Four-Band Sweep Equalizer ControlsAux 8 Direct Switch Scene Mute Safe SwitchScene Mute Assignments Stereo Switch XLR PAD SwitchGT Stereo Input Module Gain & R Gain ControlsPEAK/PFL LED Indicator Width ControlBAL Control Group SP/TC Group Modules GT Group Module Matrix Levels A, BEffect Aux Sends Group XLR EFX Return Scene Mute Safe SwitchMatrix Pre/Post Fader Reverse w/LEDMatrix Matrix AUX Mains Mono Matrix Module Talk Back SP/TC Master Section Monitor GT Master Section GT Master Section contd GT TC SP General Specifications SP Console ConfigurationsArchitect’s & Engineer’s Specifications SP Console TC Consoles are available in the following configurations GT Consoles are available in the following configurations GT/TC Side Dimensions GT rear view shown Rear Views & DimensionsSP/TC/GT USER-OPTIONS ONE Open the armrest Console DisassemblyTWO Remove top module screw Three Remove rear screwsPage SP TC GT Auxiliary 34 Switch 100mm Fader See Fader 48 Volt Phantom PowerAuxiliary 8 Direct Switch Auxiliary Mute SwitchesGroup XLR Switch Fader Reverse SwitchHF Peak/Shelve Switch High Pass SwitchMatrix Pre/Post Switch LF Peak/Shelve SwitchSwitch Mute SwitchPolarity Reverse Switch Pre/Post Fader Switch Phantom PowerScene Mute Assignment Switch Scene Mute Safe Switch w/LEDSP / TC / GT Appendix C Schematics Crest Audio Inc