4.Plug the equipment to be protected into the UPS outlet sockets.
DO NOT protect laser printers with the UPS because of the exceptionally high power requirements of the heating elements.
5.Start the UPS by pressing the button as shown in Figure 2. The indicator illuminates, indicating that power is available from the UPS output receptacles.
The UPS conducts a
The installation is complete. To learn how to operate the UPS, see “Operation” on page 9.
NOTE The batteries charge to 90% capacity in approximately 3 hours. However, it is recommended that the batteries charge for 6 to 24 hours after installation or
Powerware | ® | 5115A USB User’s Guide • www.powerware.com.au | 5 |
|
|