PowerDsine PD-6548 manual Primary Power Indicators

PD-6548

2.3Indicators

A set of indicators provide the status of the Power over Ethernet Midspan and its ports. Refer to Table 2-1 and Table 2-2 for status information during operation.

2.3.1Primary Power Indicators

A Primary Power LED (labled “AC”) is located on the front panel; the LED provides Power over Ethernet Midspan power status.

When the indicator illuminates in green, it means that the Midspan receives AC power. The “AC” indicator lits in orange to indicate Built In test failure. Refer to Table 2-1: for additional information.

2.3.2Port Indicators

One uni-color indicator (green) per port provides port status:

„Green indicates that the PD (Powered Device) is identified as "Power over Ethernet Enabled", is active and receives power.

„Blinking green indicates that the power is not delivered to a specific port.

Refer to Table 2-1 and Table 2-2 for additional information.

Note Due to the standard detection process performed on each PoE port, power is not supplied to an Ethernet device that is not PoE-enabled. In this way, PDs (non PoE -enabled) are not affected by connection to Midspan’s output port.

Power over Ethernet Solutions 12 Cat. No.: 06-6860-056