Quantum 890 USE 155 manual Preface, Data, Illustrations, Alterations

Page 5

Preface

Data, Illustrations, Alterations

Data and illustrations are not binding. We reserve the right to alter products in line with our policy of continuous product development.

Trademarks

All terms used in this publication to denote Schneider Automation products are trademarks of Schneider Automation Incorporated.

All other terms used in this publication to denote products may be registered trademarks and/or trademarks of the corresponding corporations.

Microsoft and MS-DOS are registered trademarks of Microsoft Corporation, Windows is a brand name of Microsoft Corporation in the USA and other countries.

IBM is a registered trademark of International Business Machines Corporation.

Intel is a registered trademark of Intel Corporation.

Copyright

All rights are reserved. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, including copying, processing or by online file transfer, without permission in writing by Schneider Automation Incorporated. You are not authorized to translate this document into any other language.

1999 Schneider Automation Incorporated. All rights reserved.

v

Image 5
Contents Modicon Page Breite 185 mm Höhe 230 mm Breite 178 mm Höhe 216 mm Page Data, Illustrations, Alterations PrefacePage Contents Glossary Using Panel SoftwareModbus to Ethernet Bridge CEV 300 Bridge Applications Introducing the Modbus to Ethernet BridgeBridging Between Multiple Modbus Networks Ethernet Overview Installation and ConfigurationMapping for a Modbus Slave Mapping Modbus and IP AddressesMapping for a Modbus Master Modbus to Ethernet Bridge Modbus Ethernet Front Panel LayoutComponent Name Purpose Power Parameter Specification SpecificationsAgency Approval Parameter Specification Page Installing the Bridge Hardware Mounting the Bridge Before You Install the BridgeMounting the Bridge on the DIN Rail Connecting the Power Wiring Connecting the Power WiringConnecting the Serial Cable RJ45 Port Connecting the Serial Cable RJ45 PortTSX Note Compatible Modbus Devices and CablesReferences in this figure are to the devices listed in on Modbus Cable PinoutsDB to RJ45 Adapter Kits DB9M 110 XCA 203 RS±485 RS±485 / RS±422 Connecting the Serial Cable Wiring Terminals±Wire Setting the Serial Port Switch Setting the Serial Port SwitchConnecting the Ethernet Cable Connecting the Ethernet CableConfiguring the Bridge Before You Start Configuration OverviewSafety Example RS±232 Serial Terminal Emulator Properties Connecting by the RS±232 PortTelnet Host Requirement Connecting by Telnet IP Address Not AssignedExample Telnet Connection Connecting by Telnet IP Address AssignedModbus Master Device Additional Menu Items Using the Configuration MenuConfiguration Menu Viewing and Changing Configuration Parameters Configuration Options 1Commands Default settings, Save, Quit without save Retaining the Current ValueIP Address Option 1 Network/IP SettingsSet Gateway IP Address Set NetmaskConfiguring the Bridge Attached Device Option 2 Serial and Mode SettingsSerial Protocol Interface TypeExample Option 3 Modem Control SettingsRTS/CTS Mode Slave Address Option 4 Advanced Modbus Protocol SettingsAllow Modbus Broadcasts Character TimeoutMessage Timeout Example Address Mapping Option 5 Unit ID to IP Address Mapping TableHow the Address Mapping Works Exiting the Mapping Menu Entering New Address MappingAdding a New Map Entry Deleting a Map EntryPage Using Panel Software Modbus Slave Address Using Concept or ModsoftSoftware Versions Intellution FIX MMI Using Other SoftwareWinTech Modscan Worderware MMIPage Glossary Field Default gatewayFrame Framing typesLayer InternetMAC Address NetworkRepeater SwitchRouter ServerWinsock UTPPage United States France Germany