Quantum 890 USE 155 manual Contents

		Contents
	Contents
	Modbus to Ethernet Bridge
	174 CEV 300 10	. . . . . . . . 9
1.1	Introducing the Modbus to Ethernet Bridge	. . . 10
1.1.1	Bridge Applications	. . . 10
1.1.2	Overview: Installation and Configuration	. . . 11
1.2	Mapping Modbus and IP Addresses	. . . 12
1.2.1	Mapping for a Modbus Master	. . . 12
1.2.2	Mapping for a Modbus Slave	. . . 12
1.3	Front Panel Layout	. . . 14
1.4	Specifications	. . . 16
	Installing the Bridge Hardware	. . . . . . . 19
2.1	Mounting the Bridge on the DIN Rail	. . . 20
2.1.1	Before You Install the Bridge	. . . 20
2.1.2	Mounting the Bridge	. . . 20
2.2	Connecting the Power Wiring	. . . 21
2.3	Connecting the Serial Cable (RJ45 Port)	. . . 22
2.4	Compatible Modbus Devices and Cables	. . . 23
2.5	Modbus Cable Pinouts	. . . 24
2.6	Connecting the Serial Cable (Wiring Terminals)	. . . 26
2.7	Setting the Serial Port Switch	. . . 27
2.8	Connecting the Ethernet Cable	. . . 28
	Configuring the Bridge	. . . . . . . 29
3.1	Before You Start	. . . 30
3.1.1	Configuration Overview	. . . 30
3.1.2	Safety	. . . 30
3.2	Connecting by the RS±232 Port	. . . 31
3.3	Connecting by Telnet (IP Address Not Assigned)	. . . 32
3.4	Connecting by Telnet (IP Address Assigned)	. . . 33
3.5	Using the Configuration Menu	. . . 34
3.5.1	Configuration Menu	. . . 34
3.5.2	Modbus Master Device: Additional Menu Items	. . . 34
3.5.3	Configuration Options: 1 ... 5	. . . 35
3.5.4	Viewing and Changing Configuration Parameters	. . . 35
3.5.5	Commands: Default settings, Save, Quit without save	. . . 35
890±USE±155±00		vii

Breite: 178 mm