SUPER MICRO Computer SBA-7222G-T2 user manual Exit Menu, Boot Menu Menu Option Description

Chapter 6: BIOS

Table 6-13. Boot Menu

Menu Option	Description
	These settings specify the boot sequence from the available CD/DVD drive
	devices installed in your system.
	The devices to set are:
1st ~ Drive	•	1ST DRIVE
	•	2ND DRIVE
	•	3RD DRIVE
	•	4TH DRIVE
	and so on.
Retry Boot Devices	This option allows the system to retry boot devices. Options are Enabled or
	Disabled.

6-6 Exit Menu

Select the EXIT tab from AMI BIOS SETUP UTILITY screen to enter the EXIT BIOS SETUP screen. The options for the EXIT menu are shown in Table 6-14. You may also additionally press <ESC> to exit without saving or <F10> to save your settings and exit.

	Table 6-14. Exit Menu
Menu Option	Description
Save Changes and	When you have completed the system configuration changes, select this option
	to leave BIOS Setup and reboot the computer, so the new system configuration
Exit	parameters can take effect. Select SAVE CHANGES AND EXIT from the EXIT menu
	and press <ENTER>.
Discard Changes and	Select this option to quit BIOS Setup without making any permanent changes to
	the system configuration and reboot the computer. Select DISCARD CHANGES AND
Exit	EXIT from the EXIT menu and press <ENTER>.
Discard Changes	Select this option and press <ENTER> to discard all the changes and return to
	AMI BIOS Utility Program.
	To set this feature, select LOAD OPTIMAL DEFAULTS from the EXIT menu and press
Load Optimal	<ENTER>. Then Select OK to allow BIOS to automatically load the OPTIMAL
	DEFAULTS as the BIOS Settings. The OPTIMAL SETTINGS are designed for
Defaults
	maximum system performance, but may not work best for all computer
	applications.
Load Fail-Safe	To set this feature, select LOAD FAIL-SAFEDEFAULTS from the EXIT menu and
	press <ENTER>. The FAIL-SAFEsettings are designed for maximum system
Defaults
	stability, but not maximum performance.

6-13