
SBA-7222G-T2 Blade Module User’s Manual
IPMI Configuration
The menu options in the IPMI CONFIGURATION submenu and their descriptions are shown in Table
| Table | |
|
| |
Menu Option | Description | |
IPMI Information | This static display provides information for the Status of BMC and IPMI Firmware | |
Display (Static) | Revision. | |
|
| |
View BMC System | This | |
Event Log | maximum of 15 seconds to read all BMC SEL records. | |
SEL Entry | Use the +/- keys to traverse the BMC Event Log. | |
Number | ||
| ||
|
| |
Clear BMC System | Use this option to clear all events in the BMC System Event Log. | |
Event Log | ||
| ||
| This is the input for the SET LAN Configuration command. See IPMI 1.5 | |
Set LAN | Specification Table 19.1 for details. | |
Configuration | NOTE: Each question in this | |
| to complete. | |
IP Address | Use this | |
IP Address | This setting allows you to specify either a DHCP or Static IP Address Soruce. If | |
you select Static for the IP Address Source, then the IP Address setting becomes | ||
Source | ||
active. | ||
| ||
|
| |
| This setting allows you to set the IP Address for your LAN Configuration in | |
IP Address | decimal format of XXX.XXX.XXX.XXX and with values less than 256. The | |
| current IP Address is statically displayed below. | |
MAC Address | Use this | |
|
| |
| This setting allows you to set the IP Address for your LAN Configuration in hex | |
MAC Address | format of XX.XX.XX.XX.XX.XX. The current MAC Address is statically displayed | |
| below. | |
Subnet Mask | Use this | |
|
| |
Subnet Mask | This setting allows you to set the Subnet Mask for your LAN Configuration in | |
decimal format of XXX.XXX.XXX.XXX and with values less than 256. The | ||
| current Subnet Maks is statically displayed below. | |
Gateway | Use this | |
Address | ||
| ||
|
| |
Gateway | This setting allows you to set the Gateway Address for your LAN Configuration in | |
decimal format of XXX.XXX.XXX.XXX and with values less than 256. The | ||
Address | ||
current Gateway Address is statically displayed below. | ||
| ||
BMC Watch Dog | This option allows the BMC to reset or power down the system if the operating | |
system crashes or hangs. Options include Disabled, Reset System, Power | ||
Timer Action | ||
Down or Power Cycle. | ||
| ||
|
|