SUPER MICRO Computer 5017C-MTF, 5017C-MTRF manual Chipset Configuration

Page 73

Chapter 7: BIOS

P-STATE Coordination

This feature selects the type of coordination for the P-State of the processor. P-State is a processor operational state that reduces the processor's voltage and frequency. This makes the processor more energy effiicient, resulting in further gains. The options are HW_ALL, SW_ALL and SW-ANY.

CPU C3 Report, CPU C6 Report

This BIOS feature enables or disables C3 (ACPI C2) or C6 (ACPI C3) report- ing to the operating system. The options are Disabled and Enabled.

C-State package limit setting

If set to Auto, the AMI BIOS will automatically set the limit on the C-State package register. The options are C0, C1, C6, C7 and No Limit.

Intel® Turbo Boost Technology (Available if Intel® EIST technology is

Enabled)

Turbo Mode

This feature allows processor cores to run faster than marked frequency in specific conditions. The options are Disabled and Enabled.

Long duration power limit - this is the processor power consumption limit (in Watts) during a long duration time window.

Long duration maintained - this is the time in milliseconds where the Long Duration Power Limit is maintained.

Short duration power limit - During Turbo Mode, the system may exceed the processor's default power setting and exceed the Short Duration Power limit. By increasing this value, the processor can provide better performance for a short duration.

Chipset Configuration

WARNING: Setting the wrong values in the following sections may cause the system to malfunction.

CPU Bridge Configuration

This item displays the current CPU Revision, Current CPU1 Memory Fre- quency, Memory Type and Memory Reference Code Revision.

Memory Frequency

This feature allows the user to select the memory speed. Under normal conditions, please set this to Auto. The options are Auto, Force DDR-800, Force DDR-1067, Force DDR-1333, and Force DDR-1600.

7-7

Image 73
Contents Super Manual Revision 1.0c Release Date January 2 About This Manual PrefaceManual Organization Advanced Serverboard Setup System SafetyAdvanced Chassis Setup BiosPreface Table of Contents System Interface Advanced Chassis Setup Overview Chapter IntroductionMotherboard Features Server Chassis Features Intel C200 Chipset System Block Diagram Headquarters Contacting SupermicroEurope Asia-PacificPage Preparing for Setup Chapter Server InstallationChoosing a Setup Location Unpacking the SystemServer Precautions Rack PrecautionsRack Mounting Considerations Ambient Operating TemperatureInstalling the Rear Inner Rails Installing the System into a RackIdentifying the Sections of the Rack Rails Installing Rear Inner Chassis Rails Installing the Rack RailsInstalling the Server into the Rack Installing the Server into a Telco Rack Accessing the Inside of the System Checking the Motherboard SetupChecking the Components Accessing the Inside of the System Checking the Drive Bay SetupChecking the Drives Checking the Airflow Providing PowerPower ResetChapter System Interface Control Panel ButtonsOverheat/Fan Fail Control Panel LEDsHard Drive Carrier LEDs Page Electrical Safety Precautions Chapter System SafetyGeneral Safety Precautions ESD Precautions Installing the Onboard Battery Operating PrecautionsChapter Advanced Motherboard Setup Installing the LGA1155 Processor Processor and Heatsink InstallationPage Removing the Heatsink Installing a Passive CPU HeatsinkInstalling the Heatsink Connecting Data Cables Connecting CablesConnecting Power Cables Connecting the Control PanelI/O Ports Front Control Panel Header Pins JF1Installing DIMMs Installing MemoryMemory Support DDR3 Unbuffered ECC Udimm MemoryPossible System Memory Allocation & Availability Installing Dimm into SlotAdding PCI Cards PCI Card InstallationPCI Expansion Slots PCI Slot/Card ConfigurationsMotherboard Details Number Jumper Description DefaultJumpers LED Indicators Headers/ConnectorsNumber Connector Description NumberATX Power Connector Connector DefinitionsProcessor Power Connector Power LEDPower Button Reset ButtonOverheat OH/Fan Fail/Front UID LED Serial Ports Universal Serial Bus USBEthernet Ports Chassis Intrusion Fan HeadersATX PS/2 Keyboard and PS/2 Mouse Ports External SpeakerPower Supply I2C Connector Onboard Power LEDTrusted Platform Module Header Wake-On-LANSgpio 0/1 Headers DOM PWR ConnectorSgpio 1/2 Headers VGA Enable/Disable Jumper SettingsExplanation of Jumpers Cmos ClearLAN Port Enable/Disable PCI Slot SMB EnableBMC Enable/Disable Watch Dog EnableOnboard Standby Power LED Onboard IndicatorsLAN1/LAN2 LEDs Ipmi Dedicated LANSata Ports Sata Drive ConnectionsDriver Installation Display Screen Installing DriversSuperDoctor III Interface Display Screen Health Information SuperDoctorSuperDoctor III Interface Display Screen Remote Control Page Chapter Advanced Chassis Setup Chassis Front View Control PanelSystem Fans Drive Bay Installation/RemovalSystem Fan Failure Removing the Front BezelSata Drive Installation Accessing the Drive BaysInstalling/Removing Sata Drives Mounting a Drive in a Drive CarrierMounting a Drive in a Carrier Sata BackplaneRemoving/Installing a Drive DVD-ROM Drive InstallationRemoving the Chassis Cover Power Supply Failure Power SupplyReplacing the Power Supply Removing the Power Supply How To Change the Configuration Data Starting Bios Setup UtilityChapter IntroductionHow to Start the Setup Utility Main SetupProcessor System Time/System DateSystem Memory BOOT Feature Advanced Setup ConfigurationsProcessor & Clock Options Intel AES-NI Power TechnologyIntel Hyper Threading Technology Active Processor CoresChipset Configuration North Bridge Configuration Active State Power ManagementVT-d Pcie Maximum Payload SizeIDE/SATA Configuration PCIe/PCI/PnP Configuration Super IO Device Configuration Serial Port 2 Mode Remote Access ConfigurationConsole Redirection Settings COM0/COM1/SOL Console RedirectionCPU Temperature Display Mode Fan Speed Control ModeHardware Health Configuration ACPI Configuration When Log is Full Smbios Event LogEvent Logs Erase Event LogIpmi Configuration Log EFI Status Codes When SEL FullView FRU Information BMC Network ConfigurationBoot Options Priority Boot SettingsBoot Option #1, Boot option #2, Boot Option #3, etc Administrator Password Security SettingsUser Password Boot Sector Virus ProtectionExit Options Restore DefaultsSave Changes and Exit Discard Changes and ExitRestore User Defaults Save As User DefaultsBoot Override Page Bios Error Beep Codes Appendix a Bios Error Beep CodesBios Error Beep Codes Error MessagePage Appendix B System Specifications Power Supply WeightSystem Cooling System Input RequirementsRegulatory Compliance

5017C-MTRF, 5017C-MTF specifications

Supermicro Computer has established itself as a leader in high-performance server solutions, and the Supermicro 5017C-MTF and 5017C-MTRF models exemplify the company's commitment to quality and innovation. These compact systems are designed for diverse applications, catering to both small and medium-sized enterprises as well as larger organizational needs.

The Supermicro 5017C-MTF and 5017C-MTRF come equipped with a powerful Intel Xeon E3-1200 v6 processor, offering remarkable processing capabilities that enable users to run demanding applications with ease. These systems support up to 64GB of ECC DDR4 memory, ensuring data integrity and reliability crucial for mission-critical workloads. Moreover, the implementations of Intel's turbo boost technology allow for dynamic performance enhancements, enabling processors to scale up in speed as workload demands increase.

These models highlight Supermicro's commitment to flexibility and expandability. Both the 5017C-MTF and 5017C-MTRF include multiple PCIe slots so users can integrate various expansion cards according to their requirements. Additionally, the dual Gigabit Ethernet ports enhance networking capabilities, supporting multiple connectivity options to meet organizational demands.

Storage is an important aspect of any server solution, and these models do not disappoint. They offer support for multiple SATA drives and come with options for SSD integration for high-speed data access. This makes the 5017C-MTF and 5017C-MTRF well-suited for virtualization, cloud storage solutions, or even as a database server.

The systems also boast a compact and energy-efficient design, making them ideal for space-constrained environments. The 1U rackmount form factor allows for easy deployment in data center settings, while also promoting efficient airflow and cooling design. Furthermore, both models meet stringent energy efficiency standards, which can lead to significant power savings over time.

Security and remote management features are also key highlights of the 5017C-MTF and 5017C-MTRF. Supermicro’s Intelligent Management Technology (IMT) software allows administrators to monitor system health remotely and perform management tasks effectively.

In summary, the Supermicro 5017C-MTF and 5017C-MTRF present robust server solutions packed with cutting-edge technology, flexible expansion options, and a focus on efficiency and security, catering to the evolving needs of modern businesses.