SUPER MICRO Computer 5017C-MTF, 5017C-MTRF manual Super IO Device Configuration

Page 77

Chapter 7: BIOS

PCI Latency Timer

This feature sets the latency Timer of each PCI device installed on a PCI bus. Select 64 to set the PCI latency to 64 PCI clock cycles. The options are 32, 64, 96, 128, 160, 192, 224 and 248.

SR-IOV Support

Single Root I/O Virtualization (SR-IOV) is a specification that allows a PCIe device to appear as multiple physical devices to the system. The options are Disabled and Enabled.

PCI-E Slot 4, 5, 6, & 7 OPROM

Use this feature to enable or disable PCI slot Option ROMs. The options are Dis- abled and Enabled.

Onboard LAN Option ROM Select

This feature selects whether to load the iSCSI or PXE onboard LAN option ROM. The options are iSCSI and PXE.

Load Onboard LAN1 Option ROM/Load Onboard LAN2 Option ROM

This feature is to enable or disable the onboard option ROMs. The options are Disabled and Enabled.

Boot Graphics Adapter Priority

Use the feature to select the graphics controller to be used as the primary boot device. The options are Offboard VGA and Onboard VGA.

Super IO Device Configuration

Serial Port 1 / Serial Port 2

Select Enabled to enable the onboard serial port. The options are Enabled and Disabled.

Serial Port1 Settings/ Serial Port2 Settings

This option specifies the base I/O port address and the Interrupt Request address of Serial Port 1 and Serial Port 2. Select Disabled to prevent the serial port from accessing any system resources. When this option is set to Disabled, the serial port physically becomes unavailable. Select 3F8/IRQ4 to allow the serial port to use 3F8 as its I/O port address and IRQ 4 for the interrupt address. The options for Serial Port1 are Disabled, 3F8/IRQ4, 3E8/IRQ4, 2F8/IRQ3 and 2E8/IRQ3. The options for Serial Port2 are Disabled, 3F8/IRQ4, 3E8/IRQ4, 2F8/IRQ3, and 2E8/IRQ3.

7-11

Image 77
Contents Super Manual Revision 1.0c Release Date January 2 Manual Organization PrefaceAbout This Manual Advanced Serverboard Setup System SafetyAdvanced Chassis Setup BiosPreface Table of Contents System Interface Advanced Chassis Setup Overview Chapter IntroductionMotherboard Features Server Chassis Features Intel C200 Chipset System Block Diagram Headquarters Contacting SupermicroEurope Asia-PacificPage Preparing for Setup Chapter Server InstallationChoosing a Setup Location Unpacking the SystemServer Precautions Rack PrecautionsRack Mounting Considerations Ambient Operating TemperatureIdentifying the Sections of the Rack Rails Installing the System into a RackInstalling the Rear Inner Rails Installing Rear Inner Chassis Rails Installing the Rack RailsInstalling the Server into the Rack Installing the Server into a Telco Rack Checking the Components Checking the Motherboard SetupAccessing the Inside of the System Checking the Drives Checking the Drive Bay SetupAccessing the Inside of the System Checking the Airflow Providing PowerPower ResetChapter System Interface Control Panel ButtonsOverheat/Fan Fail Control Panel LEDsHard Drive Carrier LEDs Page Electrical Safety Precautions Chapter System SafetyGeneral Safety Precautions ESD Precautions Installing the Onboard Battery Operating PrecautionsChapter Advanced Motherboard Setup Installing the LGA1155 Processor Processor and Heatsink InstallationPage Removing the Heatsink Installing a Passive CPU HeatsinkInstalling the Heatsink Connecting Data Cables Connecting CablesConnecting Power Cables Connecting the Control PanelI/O Ports Front Control Panel Header Pins JF1Installing DIMMs Installing MemoryMemory Support DDR3 Unbuffered ECC Udimm MemoryPossible System Memory Allocation & Availability Installing Dimm into SlotAdding PCI Cards PCI Card InstallationPCI Expansion Slots PCI Slot/Card ConfigurationsJumpers Number Jumper Description DefaultMotherboard Details LED Indicators Headers/ConnectorsNumber Connector Description NumberATX Power Connector Connector DefinitionsProcessor Power Connector Power LEDOverheat OH/Fan Fail/Front UID LED Reset ButtonPower Button Ethernet Ports Universal Serial Bus USBSerial Ports Chassis Intrusion Fan HeadersATX PS/2 Keyboard and PS/2 Mouse Ports External SpeakerPower Supply I2C Connector Onboard Power LEDTrusted Platform Module Header Wake-On-LANSgpio 1/2 Headers DOM PWR ConnectorSgpio 0/1 Headers VGA Enable/Disable Jumper SettingsExplanation of Jumpers Cmos ClearLAN Port Enable/Disable PCI Slot SMB EnableBMC Enable/Disable Watch Dog EnableOnboard Standby Power LED Onboard IndicatorsLAN1/LAN2 LEDs Ipmi Dedicated LANSata Ports Sata Drive ConnectionsDriver Installation Display Screen Installing DriversSuperDoctor III Interface Display Screen Health Information SuperDoctorSuperDoctor III Interface Display Screen Remote Control Page Chapter Advanced Chassis Setup Chassis Front View Control PanelSystem Fans Drive Bay Installation/RemovalSystem Fan Failure Removing the Front BezelSata Drive Installation Accessing the Drive BaysInstalling/Removing Sata Drives Mounting a Drive in a Drive CarrierMounting a Drive in a Carrier Sata BackplaneRemoving the Chassis Cover DVD-ROM Drive InstallationRemoving/Installing a Drive Replacing the Power Supply Power SupplyPower Supply Failure Removing the Power Supply How To Change the Configuration Data Starting Bios Setup UtilityChapter IntroductionHow to Start the Setup Utility Main SetupSystem Memory System Time/System DateProcessor BOOT Feature Advanced Setup ConfigurationsProcessor & Clock Options Intel AES-NI Power TechnologyIntel Hyper Threading Technology Active Processor CoresChipset Configuration North Bridge Configuration Active State Power ManagementVT-d Pcie Maximum Payload SizeIDE/SATA Configuration PCIe/PCI/PnP Configuration Super IO Device Configuration Serial Port 2 Mode Remote Access ConfigurationConsole Redirection Settings COM0/COM1/SOL Console RedirectionHardware Health Configuration Fan Speed Control ModeCPU Temperature Display Mode ACPI Configuration When Log is Full Smbios Event LogEvent Logs Erase Event LogIpmi Configuration Log EFI Status Codes When SEL FullView FRU Information BMC Network ConfigurationBoot Option #1, Boot option #2, Boot Option #3, etc Boot SettingsBoot Options Priority Administrator Password Security SettingsUser Password Boot Sector Virus ProtectionExit Options Restore DefaultsSave Changes and Exit Discard Changes and ExitBoot Override Save As User DefaultsRestore User Defaults Page Bios Error Beep Codes Appendix a Bios Error Beep CodesBios Error Beep Codes Error MessagePage Appendix B System Specifications Power Supply WeightSystem Cooling System Input RequirementsRegulatory Compliance

5017C-MTRF, 5017C-MTF specifications

Supermicro Computer has established itself as a leader in high-performance server solutions, and the Supermicro 5017C-MTF and 5017C-MTRF models exemplify the company's commitment to quality and innovation. These compact systems are designed for diverse applications, catering to both small and medium-sized enterprises as well as larger organizational needs.

The Supermicro 5017C-MTF and 5017C-MTRF come equipped with a powerful Intel Xeon E3-1200 v6 processor, offering remarkable processing capabilities that enable users to run demanding applications with ease. These systems support up to 64GB of ECC DDR4 memory, ensuring data integrity and reliability crucial for mission-critical workloads. Moreover, the implementations of Intel's turbo boost technology allow for dynamic performance enhancements, enabling processors to scale up in speed as workload demands increase.

These models highlight Supermicro's commitment to flexibility and expandability. Both the 5017C-MTF and 5017C-MTRF include multiple PCIe slots so users can integrate various expansion cards according to their requirements. Additionally, the dual Gigabit Ethernet ports enhance networking capabilities, supporting multiple connectivity options to meet organizational demands.

Storage is an important aspect of any server solution, and these models do not disappoint. They offer support for multiple SATA drives and come with options for SSD integration for high-speed data access. This makes the 5017C-MTF and 5017C-MTRF well-suited for virtualization, cloud storage solutions, or even as a database server.

The systems also boast a compact and energy-efficient design, making them ideal for space-constrained environments. The 1U rackmount form factor allows for easy deployment in data center settings, while also promoting efficient airflow and cooling design. Furthermore, both models meet stringent energy efficiency standards, which can lead to significant power savings over time.

Security and remote management features are also key highlights of the 5017C-MTF and 5017C-MTRF. Supermicro’s Intelligent Management Technology (IMT) software allows administrators to monitor system health remotely and perform management tasks effectively.

In summary, the Supermicro 5017C-MTF and 5017C-MTRF present robust server solutions packed with cutting-edge technology, flexible expansion options, and a focus on efficiency and security, catering to the evolving needs of modern businesses.