SUPER MICRO Computer 1012G-MTF user manual Server Chassis Features

Chapter 1: Introduction

Other Features

Other onboard features that promote system health include onboard voltage monitors, a chassis intrusion header, 3-phase switching voltage regulators, chassis and CPU overheat sensors, Thermal Monitor 2 (TM2) support and a BIOS flash upgrade utility.

1-3 Server Chassis Features

The following is a general outline of the main features of the SC813MTS-350CBP chassis.

System Power

When configured as a A+ Server 1012G-MTF, the SC813 chassis includes a single 350 Watts power supply.

SATA Subsystem

For the A+ Server 1012G-MTF, the SC813 chassis was designed to support four SATA hard drives, which are hot-swappable units.

Note: The operating system you use must have RAID support to enable the hot- swap capability of the SATA drives (system-based RAID is not available for SATA).

Control Panel

The SC813's control panel provides important system monitoring and control information. LEDs indicate power on, network activity, hard disk drive activity and system overheat conditions. The control panel also includes a main power button and a system reset button. The front of the SC813 also includes a COM port and two USB serial ports for easy access.

Rear I/O Panel

The SC813 is a 1U rackmount chassis. Its I/O panel provides one PCI motherboard expansion slot, one COM port (another is internal), two USB ports, a parallel (printer) port, PS/2 mouse and keyboard ports, a VGA port and two 1-Gb Ethernet ports.

1-3