SUPER MICRO Computer 1012G-MTF Wait for F1 if Error, Hit DEL Message Display, Watch Dog Function

Page 93

Chapter 7: BIOS

Wait for F1 if Error

This setting controls the system response when an error is detected during the boot sequence. When enabled, BIOS will stop the boot sequence when an error is detected, at which point you will need to press the F1 button to re-enter the BIOS setup menu. The options are Enabled and Disabled.

Hit 'DEL' Message Display

Use this option to Enable or Disable the "Press DEL to run setup" message in POST.

Watch Dog Function

Allows system to restart when system is inactive more than 5-minutes. The options are Enabled and Disabled.

Power Button Function

This sets the function of the power button when you turn off the system. Options include 4-second Overide and Instant Off.

Restore on AC Power Loss

This sets the action that occurs when an AC power loss occurs. Options include Power Off, Power On and Last State.

Interrupt 19 Capture

Select Enabled to allow ROMs to trap Interrupt 19. The options are Enabled and Disabled.

EUP Support

This setting allows you to enable or disable supplied standby power in S5. Set to Enabled to for EUP requirements and set to Disabled for wakening capability.

7-3

Image 93
Contents Super Page Preface About This ManualManual Organization Bios Advanced Chassis SetupPreface Contents System Interface Viii Advanced Chassis Setup Bios Overview Chapter IntroductionProcessors Memory Motherboard FeaturesSerial ATA PCI Expansion SlotsServer Chassis Features Cooling System AMD SR5650/SP5100 Chipset System Block DiagramHeadquarters Contacting SupermicroEurope Asia-PacificPage Chapter Server Installation Preparing for SetupUnpacking the System Choosing a Setup Location Rack PrecautionsServer Precautions Rack Mounting Considerations Ambient Operating TemperatureInstalling the System into a Rack Installing the Rear Inner RailsIdentifying the Sections of the Rack Rails Installing Rear Inner Chassis Rails Installing the Rack RailsInstalling the Server into the Rack Installing the Server into a Telco Rack Accessing the Inside of the System Checking the Motherboard SetupProviding Power Checking the Drive Bay SetupChecking the Components Checking the AirflowPage Power ResetChapter System Interface Control Panel ButtonsInformation LED Control Panel LEDsInformation LED Status DescriptionHDD Drive Carrier LEDsPage About Standardized Warning Statements Chapter Standardized Warning Statements for AC Systemsהרהזא תורהצה ןונקת Bewaar Deze Instructies 設置手順書 システムを電源に接続する前に、設置手順書をお読み下さい。 Installation InstructionsCircuit Breaker 電源切断の警告 Power Disconnection Warningםיביכר תרסה וא תנקתה ךרוצל זראמה לש ימינפה קלחל השיג ינפל 機器の設置 Equipment Installationアクセス制限区域 このユニットは、アクセス制限区域に設置されることを想定しています。 Restricted Area電池の取り扱い Battery HandlingPage הדיחיה תא Redundant Power Suppliesバックプレーンの電圧 Backplane Voltage地方および国の電気規格に準拠 機器の取り付けはその地方および国の電気規格に準拠する必要があります。 Comply with Local and National Electrical Codes製品の廃棄 Product Disposalファン・ホットスワップの警告 Hot Swap Fan Warning當您從機架移除風扇裝置,風扇可能仍在轉動。小心不要將手指、螺絲起子和其他 物品太靠近風扇。 電源コードとACアダプター Power Cable and AC AdapterPage Page Precautions Chapter Advanced Motherboard SetupHandling the Motherboard UnpackingConnecting Cables Motherboard InstallationConnecting Data Cables Installing to the MotherboardConnecting the Control Panel Connecting Power CablesI/O Ports I/O PortsInstalling the Processors Processor and Heatsink InstallationCPU and/or the socket SNK-0042P Heatsink Installing a Passive CPU HeatsinkInstalling Memory Installing MemoryMemory Support Release Tab Front ViewPer Channel Dimm Populations Options Maximum MemoryInstalling an Expansion Card Adding PCI Expansion CardsPossible System Memory Allocation & Availability H8SGL-F Motherboard Layout Motherboard DetailsH8SGL-F Quick Reference Jumper Description Default SettingAdvanced Motherboard Setup Power Connectors Connector DefinitionsPwon Connector Reset ConnectorPower On LED Video ConnectorNMI Button USB Headers Universal Serial Bus PortsFan Headers Serial PortsChassis Intrusion Power I2COverheat LED Wake-On-LANATX PS/2 Keyboard and PS/2 Mouse Ports Power LED/SpeakerCompact Flash Card PWR Connector Trusted Platform Module HeaderLAN1/2 Ethernet Ports Explanation of Jumpers Jumper SettingsCmos Clear To Clear CmosLAN1/2 Enable/Disable VGA Enable/DisableOnboard Speaker Enable/Disable I2C to PCI-Express SlotCompact Flash Master/Slave Select Watch Dog Enable/DisableUSB Wake-Up BMC JumperPower LED Onboard IndicatorsLAN1/LAN2 LEDs Dedicated Ipmi LAN LEDsIDE Connector IDE and Sata Drive ConnectionsSata Ports Enabling Sata RAID Installing the OS/SATA DriverSerial ATA Sata Building a Driver DisketteBios Setup Screen Enabling Sata RAID in the BiosDotHill RAID Utility Program Screen Using the DotHill and Adaptec RAID UtilityInstalling the RAID Driver During OS Installation Installing SoftwareSuperDoctor Driver/Tool Installation Display Screen11. SuperDoctor III Interface Display Screen Remote Control 12. Installing the Onboard Battery Motherboard BatteryPage Static-Sensitive Devices Chapter Advanced Chassis SetupUSB COM1 VGA Ethernet Ports Port Port Ports Control PanelSystem Fans Drive Bay Installation/RemovalRemoving the Front Bezel System Fan FailureAccessing the Drive Bays Sata Drive InstallationMounting a Drive in a Drive Carrier Sata Backplane Installing/Removing SAS/SATA DrivesDVD-ROM Drive Installation Removing/Installing a DriveRemoving the Chassis Cover Power Supply Power Supply FailureReplacing the Power Supply Page Starting the Setup Utility ChapterIntroduction Advanced Settings Menu  Boot FeatureMain Menu Power Button Function Wait for F1 if ErrorRestore on AC Power Loss Hit DEL Message Display Processor and Clock Options  Advanced Chipset Control  NorthBridge Configuration  Memory Configuration ECC Configuration  Dram Timing Configuration  IDE Configuration Primary/Secondary/Third/Fourth IDE Master/Slave  PCI/PnP Configuration  SuperIO Device Configuration  Remote Access Configuration Sredir Memory Display Delay  Hardware Health ConfigurationCPU Overheat Alarm VT-UTF8 Combo Key SupportPS2 KB/MS Wakeup  Acpi Configuration Ipmi Configuration  Set LAN Configuration View BMC System Event Log IP Address Source BMC Watch Dog Timer ActionIP Address Subnet MaskSecurity Menu  Event Log Configuration Boot Device Priority Boot MenuRetry Boot Devices  Hard Disk DrivesExit Menu Page Amibios Error Beep Codes Appendix a Post Error Beep CodesPage Appendix B System Specifications Power Supply WeightChassis System CoolingRegulatory Compliance