SUPER MICRO Computer 5015A-EHF-D525 XSuper IO Device Configuration, XRemote Access Configuration

Page 72

SUPERSERVER 5015A-EHF-D525 User's Manual

PCI Slot 1

Use this feature to enable or disable PCI slot Option ROMs. The options are Dis- abled and Enabled.

Load Onboard LAN 1 Option ROM/ Load Onboard LAN 2 Option ROM

Select Enabled to load the onboard LAN Option ROM for the LAN port as specified. The options are Enabled and Disabled.

Initiate Graphics Adapter

Use this feature to select the graphics controller to be used as the primary boot device. The options are Other, Onboard VGA and Slot 6. Select Slot 6 if a graphics controller is installed in the CPU-controlled Slot 6 slot.

XSuper IO Device Configuration

Serial Port1 Address/ Serial Port2 Address

This option specifies the base I/O port address and the Interrupt Request address of Serial Port 1 and Serial Port 2. Select Disabled to prevent the serial port from accessing any system resources. When this option is set to Disabled, the serial port physically becomes unavailable. Select 3F8/IRQ4 to allow the serial port to use 3F8 as its I/O port address and IRQ 4 for the interrupt address. The options for Serial Port1 are Disabled, 3F8/IRQ4, 2E8/IRQ3. The options for Serial Port2 are Disabled, 2F8/IRQ3, and 2E8/IRQ3.

XRemote Access Configuration

Remote Access

This allows the user to enable the Remote Access feature. The options are Dis- abled and Enabled.

If Remote Access is set to Enabled, the following items will display:

Serial Port Number

This feature allows the user decide which serial port to be used for Console Redirection. The options are COM 1, COM 2 and COM 3.

Serial Port Mode

This feature allows the user to set the serial port mode for Console Redirection. The options are 115200 8, n 1; 57600 8, n, 1; 38400 8, n, 1; 19200 8, n, 1; and 9600 8, n, 1.

7-12

Image 72
Contents Super Manual Revision Release Date October 18 Server Installation About This ManualManual Organization IntroductionSystem Safety Advanced Motherboard SetupAdvanced Chassis Setup BiosPreface Table of Contents System Safety Advanced Chassis Setup Table of Contents Page Chapter Introduction OverviewMotherboard Features Intel Atom D525 + ICH9R Chipset System Block Diagram Server Chassis Features Contacting Supermicro HeadquartersEurope Asia-PacificPage Preparing for Setup Choosing a Setup LocationUnpacking the System Rack Precautions Server PrecautionsAmbient Operating Temperature Rack Mounting ConsiderationsInstalling the Chassis into a Rack Rack Mounting InstructionsInstalling into a Telco Rack Installing the Chassis into a Telco RackChecking the Motherboard Setup Accessing the Inside of the System FigureChecking the Components Accessing the Inside of the System Checking the Drive Bay Setup Providing PowerChecking the Drives Reset Button PowerControl Panel Buttons Control Panel LEDsOverheat HDDPower Page Chapter System Safety Electrical Safety PrecautionsGeneral Safety Precautions ESD Precautions Operating Precautions Installing the Onboard BatteryChapter Advanced Motherboard Setup Handling the MotherboardMotherboard Installation Installing to the ChassisUnpacking Connecting Cables Connecting Data CablesConnecting Power Cables Connecting the Control PanelControl Panel Header Pins I/O PortsInstalling Memory Dimm InstallationOnboard Processor Memory SupportDimm Installation Installing an Expansion Card Adding PCI Expansion CardsMotherboard Details Number Connector Description JPCIE1Connector Definitions Main ATX Power Supply ConnectorExternal Power Connector Power ButtonReset Button Power Fail LEDOverheat/Fan Fail Power LED NMI ButtonFan Headers Overheat/Fan Fail LED JOHSata DOM Power Power SMB I2C ConnectorChassis Intrusion Serial PortsATX PS/2 Keyboard and PS/2 Mouse Ports Sgpio 0/1 HeadersLAN1/2 Ethernet Ports Universal Serial Bus USB Trusted Platform Module HeaderJumper Settings LAN1/2 Enable/DisableExplanation of Jumpers Cmos ClearWatch Dog Enable/Disable Power Force On Enable/DisableVGA Enable/Disable SMB I2C Bus to PCI SlotsBMC Enable/Disable DCD / P5V Select OEM optionCOM3 Redirection Select OEM option Onboard Indicators Sata PortsLAN1/2 LEDs Sata PortsInstalling Software Supero Doctor Supero Doctor III Interface Display Screen Remote Control Page Control Panel Chassis Front ViewDrive Bay Installation/Removal Installling a 3.5 Sata Drive FigureInstallling 2.5 Sata Drives Figure System FansInstalling a 3.5 Hard Drive Power Supply Replacing the Power Supply FigureInstalling the Power Supply Starting Bios Setup Utility How To Change the Configuration DataIntroduction Main Setup How to Start the Setup UtilitySystem Time/System Date ProcessorSystem Memory Advanced Setup Configurations Xboot FeatureQuick Boot Quiet BootBootup Num-Lock Wait For F1 If ErrorPower Button Function Restore on AC Power LossStandby Power in S5 Xcpu ConfigurationClock Spread Spectrum Max Cpuid Value LimitXAdvanced Chipset Control XNorthbridge ConfigurationXIDE/SATA Configuration IDE Detect Timeout sec LBA/Large ModePIO Mode TypeDMA Mode XPCI/PnP Configuration XRemote Access Configuration XSuper IO Device ConfigurationRedirection After Bios Post Sredir Memory Display DelayFlow Control Terminal TypeCPU Overheat Alarm CPU TemperatureSystem Temperature XHardware Health ConfigurationCpufan / Sysfan Speed High Performance Event Timer Xacpi ConfigurationFan Speed Control Modes USB Device WakeupSuspend Mode Headless ModeAcpi Version Features Acpi Aware O/SXipmi Configuration XEvent Log Configuration Security Settings Supervisor PasswordUser Password Change Supervisor PasswordChange User Password Boot Sector Virus ProtectionBoot Settings XBoot Device PriorityXHard Disk Drives Retry Boot Devices Exit OptionsXRemovable Drives Save Changes and ExitLoad Optimal Defaults Load Fail-Safe DefaultsDiscard Changes and Exit Discard ChangesAppendix a Post Error Beep Codes Recoverable Post Error Beep CodesPage Appendix B System Specifications System Input Requirements Appendix B System Specifications

5015A-EHF-D525 specifications

The Super Micro Computer 5015A-EHF-D525 is an exceptional server designed to deliver outstanding performance in various computing environments. It is a robust solution tailored for small to medium-sized businesses, offering a perfect balance of power and efficiency.

At the heart of the 5015A-EHF-D525 is the Intel Atom D525 processor, a dual-core CPU that operates with a thermal design power of just 13 watts. This low-power design not only contributes to energy savings but also results in less heat generation, allowing the server to operate quietly, making it ideal for environments where noise is a concern.

One of the standout features of the 5015A-EHF-D525 is its compact form factor. The server's efficient design fits perfectly in a 1U rackmount space, providing a high-density solution without compromising on performance. This compact design is especially beneficial for businesses looking to optimize space in their data centers.

The server supports up to 8GB of DDR3 memory, offering ample capacity to handle various workloads and applications efficiently. With two DIMM slots available, users can easily upgrade their memory as their needs grow. This flexibility ensures that the server can adapt to evolving business requirements.

In terms of storage, the Super Micro 5015A-EHF-D525 offers a range of options. It includes support for up to four 3.5-inch SATA drives, allowing for significant storage capacity to accommodate data-intensive applications. With support for RAID 0, 1, 5, and 10 configurations, users can enhance data protection and improve performance.

Connectivity is another strong point of the 5015A-EHF-D525. The server features dual Gigabit Ethernet ports, enabling high-speed network access and redundancy. This dual-port configuration ensures that the system remains operational even in the event of a network failure.

The server is equipped with IPMI 2.0 support, which allows for remote management and monitoring. This technology provides administrators with the ability to manage the server even when the operating system is not functional, ensuring maximum uptime and efficiency.

Super Micro has integrated various energy-efficient technologies into the 5015A-EHF-D525, making it compliant with various green computing initiatives. This commitment to sustainability is reflected in its design and operation, allowing businesses to minimize their environmental impact while maximizing performance.

In conclusion, the Super Micro Computer 5015A-EHF-D525 is a powerful, efficient, and versatile server perfect for businesses seeking a reliable computing solution. Its combination of advanced features, low power consumption, and excellent expandability makes it a formidable choice in the competitive server market.