SUPER MICRO Computer 5015A-EHF-D525 user manual XIDE/SATA Configuration

Page 68

SUPERSERVER 5015A-EHF-D525 User's Manual

Active State Power Management

Select Enabled to start Active-State Power Management for signal transactions between L0 and L1 Links on the PCI Express Bus. This maximizes power-saving and transaction speed. The options are Enabled and Disabled.

Reserved Page Route

This feature allows the user to decide which bus to send debug information to. The options are Disabled, PCI and LPC.

USB Functions

This feature allows the user to decide the number of onboard USB ports to be en- abled. The Options are: Disabled, 2 USB ports, 4 USB ports, 6 USB ports, 8 USB ports, 10 USB ports, and 12 USB ports.

Legacy USB Support (available if USB Functions above is Enabled)

Select Enabled to use Legacy USB devices. If this item is set to Auto, Legacy USB support will be automatically enabled if a legacy USB device is installed on the motherboard, and vise versa. The settings are Disabled, Enabled and Auto.

USB Controller

This feature allows the user to Enable or Disable the onboard USB controller. The options are Enabled and Disabled. Note: This function is grayed-out if USB Func- tions above is set to Enabled.

XIDE/SATA Configuration

When this submenu is selected, the AMI BIOS automatically detects the presence of the IDE Devices and displays the following items:

SATA#1 Configuration

If Compatible is selected, it sets SATA#1 to legacy compatibility mode, while se- lecting Enhanced sets SATA#1 to native SATA mode. The options are Disabled, Compatible, Enhanced.

Configure SATA#1 as

This feature allows the user to select the drive type for SATA#1. The options are IDE, RAID and AHCI.

7-8

Image 68
Contents Super Manual Revision Release Date October 18 Server Installation About This ManualManual Organization IntroductionSystem Safety Advanced Motherboard SetupAdvanced Chassis Setup BiosPreface Table of Contents System Safety Advanced Chassis Setup Table of Contents Page Chapter Introduction OverviewMotherboard Features Intel Atom D525 + ICH9R Chipset System Block Diagram Server Chassis Features Contacting Supermicro HeadquartersEurope Asia-PacificPage Unpacking the System Preparing for SetupChoosing a Setup Location Rack Precautions Server PrecautionsAmbient Operating Temperature Rack Mounting ConsiderationsInstalling the Chassis into a Rack Rack Mounting InstructionsInstalling into a Telco Rack Installing the Chassis into a Telco RackChecking the Components Checking the Motherboard SetupAccessing the Inside of the System Figure Accessing the Inside of the System Checking the Drives Checking the Drive Bay SetupProviding Power Reset Button PowerControl Panel Buttons Control Panel LEDsOverheat HDDPower Page Chapter System Safety Electrical Safety PrecautionsGeneral Safety Precautions ESD Precautions Operating Precautions Installing the Onboard BatteryChapter Advanced Motherboard Setup Handling the MotherboardUnpacking Motherboard InstallationInstalling to the Chassis Connecting Cables Connecting Data CablesConnecting Power Cables Connecting the Control PanelControl Panel Header Pins I/O PortsInstalling Memory Dimm InstallationOnboard Processor Memory SupportDimm Installation Installing an Expansion Card Adding PCI Expansion CardsMotherboard Details Number Connector Description JPCIE1Connector Definitions Main ATX Power Supply ConnectorExternal Power Connector Power ButtonOverheat/Fan Fail Reset ButtonPower Fail LED Power LED NMI ButtonFan Headers Overheat/Fan Fail LED JOHSata DOM Power Power SMB I2C ConnectorChassis Intrusion Serial PortsLAN1/2 Ethernet Ports ATX PS/2 Keyboard and PS/2 Mouse PortsSgpio 0/1 Headers Universal Serial Bus USB Trusted Platform Module HeaderJumper Settings LAN1/2 Enable/DisableExplanation of Jumpers Cmos ClearWatch Dog Enable/Disable Power Force On Enable/DisableVGA Enable/Disable SMB I2C Bus to PCI SlotsCOM3 Redirection Select OEM option BMC Enable/DisableDCD / P5V Select OEM option Onboard Indicators Sata PortsLAN1/2 LEDs Sata PortsInstalling Software Supero Doctor Supero Doctor III Interface Display Screen Remote Control Page Control Panel Chassis Front ViewDrive Bay Installation/Removal Installling a 3.5 Sata Drive FigureInstallling 2.5 Sata Drives Figure System FansInstalling a 3.5 Hard Drive Power Supply Replacing the Power Supply FigureInstalling the Power Supply Introduction Starting Bios Setup UtilityHow To Change the Configuration Data Main Setup How to Start the Setup UtilitySystem Memory System Time/System DateProcessor Advanced Setup Configurations Xboot FeatureQuick Boot Quiet BootBootup Num-Lock Wait For F1 If ErrorPower Button Function Restore on AC Power LossStandby Power in S5 Xcpu ConfigurationClock Spread Spectrum Max Cpuid Value LimitXAdvanced Chipset Control XNorthbridge ConfigurationXIDE/SATA Configuration IDE Detect Timeout sec LBA/Large ModePIO Mode TypeDMA Mode XPCI/PnP Configuration XRemote Access Configuration XSuper IO Device ConfigurationRedirection After Bios Post Sredir Memory Display DelayFlow Control Terminal TypeCPU Overheat Alarm CPU TemperatureSystem Temperature XHardware Health ConfigurationCpufan / Sysfan Speed High Performance Event Timer Xacpi ConfigurationFan Speed Control Modes USB Device WakeupSuspend Mode Headless ModeAcpi Version Features Acpi Aware O/SXipmi Configuration XEvent Log Configuration Security Settings Supervisor PasswordUser Password Change Supervisor PasswordChange User Password Boot Sector Virus ProtectionXHard Disk Drives Boot SettingsXBoot Device Priority Retry Boot Devices Exit OptionsXRemovable Drives Save Changes and ExitLoad Optimal Defaults Load Fail-Safe DefaultsDiscard Changes and Exit Discard ChangesAppendix a Post Error Beep Codes Recoverable Post Error Beep CodesPage Appendix B System Specifications System Input Requirements Appendix B System Specifications

5015A-EHF-D525 specifications

The Super Micro Computer 5015A-EHF-D525 is an exceptional server designed to deliver outstanding performance in various computing environments. It is a robust solution tailored for small to medium-sized businesses, offering a perfect balance of power and efficiency.

At the heart of the 5015A-EHF-D525 is the Intel Atom D525 processor, a dual-core CPU that operates with a thermal design power of just 13 watts. This low-power design not only contributes to energy savings but also results in less heat generation, allowing the server to operate quietly, making it ideal for environments where noise is a concern.

One of the standout features of the 5015A-EHF-D525 is its compact form factor. The server's efficient design fits perfectly in a 1U rackmount space, providing a high-density solution without compromising on performance. This compact design is especially beneficial for businesses looking to optimize space in their data centers.

The server supports up to 8GB of DDR3 memory, offering ample capacity to handle various workloads and applications efficiently. With two DIMM slots available, users can easily upgrade their memory as their needs grow. This flexibility ensures that the server can adapt to evolving business requirements.

In terms of storage, the Super Micro 5015A-EHF-D525 offers a range of options. It includes support for up to four 3.5-inch SATA drives, allowing for significant storage capacity to accommodate data-intensive applications. With support for RAID 0, 1, 5, and 10 configurations, users can enhance data protection and improve performance.

Connectivity is another strong point of the 5015A-EHF-D525. The server features dual Gigabit Ethernet ports, enabling high-speed network access and redundancy. This dual-port configuration ensures that the system remains operational even in the event of a network failure.

The server is equipped with IPMI 2.0 support, which allows for remote management and monitoring. This technology provides administrators with the ability to manage the server even when the operating system is not functional, ensuring maximum uptime and efficiency.

Super Micro has integrated various energy-efficient technologies into the 5015A-EHF-D525, making it compliant with various green computing initiatives. This commitment to sustainability is reflected in its design and operation, allowing businesses to minimize their environmental impact while maximizing performance.

In conclusion, the Super Micro Computer 5015A-EHF-D525 is a powerful, efficient, and versatile server perfect for businesses seeking a reliable computing solution. Its combination of advanced features, low power consumption, and excellent expandability makes it a formidable choice in the competitive server market.