StorCase Technology manual General Description, DE100i-A100 Receiving Frame and Carrier

Page 10

Introduction

3

General Description

NOTE: For Ultra ATA133 (133MByte/sec) operation, an Ultra ATA/133 controller and hard drive(s), and appropriate 40-pin, 80-conductor cable are required.

The StorCase Technology Data Express® DE100i-A100is a removable drive carrier and receiving frame designed to provide durable and reliable mounting for 3.5” Ultra ATA133 drives within 5.25" half-height peripheral slots (Figure 2). It is downward-compatible with earlier technology IDE drives.

The DE100i-A100 allows a drive to be removed and transported to another DE100i-A100- equipped computer or expansion chassis, and also provides the ability to secure sensitive data by removing and storing the drive safely for future use.

Figure 2: DE100i-A100 Receiving Frame and Carrier

This User's Guide describes the steps required to install the StorCase Data Express DE100i-A100 removable enclosure inside a computer peripheral bay. This guide supplements documentation provided with the host computer system, operating system, and the drive to be installed within the Data Express carrier.

DE100i-A100 User's Guide - Rev. C02

StorCase Technology, Inc.

Image 10
Contents Data Express DE100i-A100 Data Express DE100i-A100 Limited Warranty Duration of WarrantyDisclaimers Warranty Claim RequirementsFree Technical Support Such damagesDeclaration of Conformity Table of Contents List of Figures List of TablesSerial Numbers Packaging InformationReceiving Frame Drive Carrier Package Contents General Description DE100i-A100 Receiving Frame and CarrierReceiving Frame Front Panel Receiving Frame Front PanelReceiving Frame Rear Panel Receiving Frame Unit ID Number and Activity DisplayReceiving Frame Rear Panel Installation Installing the Drive into the CarrierInstallation Drive Installation AssemblyInstalling the Receiving Frame Slave Drive SelectSelecting the Unit ID Number Receiving Frame Mounting HolesUnit ID Select Switch Location Unit ID Select Switch Settings Unit ID Select Switch SettingsConnector J2 AT/IDE Interface Signals PinAppendices Physical Specifications Carrier Receiving Frame Appendix a Specifications/DimensionsEnvironmental Specifications Operating Storage Electrical SpecificationsAppendix a Specifications/Dimensions Appendix B Attaching the ON/OFF Key Figure B-1 Attaching the ON/OFF KeyAppendix C Optional Accessories Carrying CaseDrive Cover Drive PlugSolenoid Drive Lock Figure C-4 Solenoid MechanismReaders Comments S I N E S S R E P LY M a I L