StorCase Technology DE100i-A100 manual Drive Installation Assembly

Page 15

8	Installation

Installation

1.Attach the I/O cable on the drive carrier circuit board to the drive. Refer to Figure 7 for an illustration of the installation process.

2.Attach the power cable on the drive carrier circuit board to the drive. Carefully insert the drive into the drive carrier at an angle, cable-end first. Make sure none of the cables are pinched. Lower the front of the drive carefully into place. Fasten the drive into the carrier with the four (4) screws provided as shown in Figure 7.

3.Install the provided cable cover.

Figure 7: Drive Installation Assembly

StorCase Technology, Inc.

DE100i-A100 User's Guide - Rev. C02

Image 15

Contents Data Express DE100i-A100 Data Express DE100i-A100 Duration of Warranty Limited WarrantySuch damages Warranty Claim RequirementsFree Technical Support DisclaimersDeclaration of Conformity Table of Contents List of Tables List of FiguresPackaging Information Serial NumbersReceiving Frame Drive Carrier Package Contents DE100i-A100 Receiving Frame and Carrier General DescriptionReceiving Frame Front Panel Receiving Frame Front PanelReceiving Frame Unit ID Number and Activity Display Receiving Frame Rear PanelReceiving Frame Rear Panel Installing the Drive into the Carrier InstallationDrive Installation Assembly InstallationSlave Drive Select Installing the Receiving FrameReceiving Frame Mounting Holes Selecting the Unit ID NumberUnit ID Select Switch Location Unit ID Select Switch Settings Unit ID Select Switch SettingsAT/IDE Interface Signals Pin Connector J2Appendices Electrical Specifications Appendix a Specifications/DimensionsEnvironmental Specifications Operating Storage Physical Specifications Carrier Receiving FrameAppendix a Specifications/Dimensions Figure B-1 Attaching the ON/OFF Key Appendix B Attaching the ON/OFF KeyCarrying Case Appendix C Optional AccessoriesDrive Plug Drive CoverFigure C-4 Solenoid Mechanism Solenoid Drive LockReaders Comments S I N E S S R E P LY M a I L