StorCase Technology DE100i-A100 manual Appendix B Attaching the ON/OFF Key

Appendix B - Attaching the ON/OFF Key 17

Appendix B - Attaching the ON/OFF Key

The following information describes the necessary steps to attach the ON/OFF key to the key lock mechanism so that it is non-removable, preventing accidental key loss. The procedure can be reversed at a later date to revert back to a removable key.

1. Make certain power is OFF to the receiving frame.

Locate the rectangular shaped key lock mecha- nism access hole on the inside of the receiving frame. Note that the pawl is in an upright position.

Insert the key into the lock.

2. Rotate the key 90 degrees counterclockwise so that the pawl is visible in the access hole as shown in the figure at left.

3. Using the provided alignment tool, unscrew and remove the pawl from the access hole.

4. Rotate the key 180 degrees clockwise (or coun- terclockwise).

5. Reinstall the pawl into the access hole with the alignment tool.

The key lock has now been reconfigured.

Figure B-1: Attaching the ON/OFF Key

DE100i-A100 User's Guide - Rev. C02 StorCase Technology, Inc.