SMC Networks SMCGS24 manual Installing the Switch, Package Contents, Selecting a Site

Page 22

INSTALLING THE SWITCH

INSTALLING THE SWITCH

Before installing the switch, verify that you have all the items listed under “Package Contents.” Note that the switch can be installed on any suitably large flat surface or in a standard EIA 19-inch rack.

Package Contents

The EZ Switch 10/100/1000 includes:

•EZ Switch 10/100/1000 (SMCGS16 or SMCGS24)

•Four rubber foot pads

•Rack-mount bracket kit

•Appropriate AC power cord

•This User Guide

•SMC Warranty Registration Card

Selecting a Site

Be sure to follow the site selection guidelines below when choosing a location:

•Select a suitable location for the switch:

•It should be accessible for installing, cabling and maintaining the switch.

•The temperature and humidity should be within the ranges listed in the specifications.

•The status LEDs should be clearly visible.

4

Image 22

Contents Page Page EZ Switch 10/100/1000 User Guide Trademarks Limited Warranty Limited Warranty FCC Class a CompliancesEC Conformance Declaration Class a Industry Canada Class a Japan Vcci Class aCompliances Power Cord Set Vii Viii Halten Purpose Environmental StatementAudience Safety Compliance Warnhinweis Faseroptikanschlüsse Optische SicherheitXii Table of Contents Viii Features and Benefits IntroductionFront Panel RJ-45 Ports Front Panel LEDsRear Panel Package Contents Installing the SwitchSelecting a Site Instructions Installing the Switch Application Example Typical application for the SMCGS16 is illustrated belowSymptom TroubleshootingDiagnosing Switch Indicators Possible SolutionsCables Cable Specifications10BASE-T/100BASE-TX Pin Assignments Pin MDI-X Signal Name MDI Signal Name 1000BASE-T Pin AssignmentsAdjusting Existing Category 5 Cabling Cable Testing for Existing Category 5 Cable1000BASE-T Cable Requirements Product Specifications EZ Switch 10/100/1000Power Requirement WeightPower Consumption TemperatureProduct Specifications Page For Technical SUPPORT, Call