Shure manual Installing the UP4 Receiver, Power Cable

Page 13

ENGLISH

ENGLISH

INSTALLING THE UP4 RECEIVER

To Audio Input

Side Mounted

Rear Mounted

To Power Supply

(if not using battery power)

FIGURE 23

1.After the mounting box is attached to the camera, insert the UP receiver in the box. It should slide in easily, but fit snuggly.

2.Connect XLR audio output on the bottom of UP receiver to audio input on the camera.

3.If not using internal 9V battery power, connect the DC jack on the bottom of the UP receiver to an external power supply (see Power Cable).

POWER CABLE

The supplied power cable consists of a locking DC power jack on one end and bare wires on the other. This is due to the wide variety of connectors used by various camera manufacturers. In order to use the supplied power cable, you will first need to determine the appropriate connector for your camera. Once you have obtained the correct connector, you will need to attach it to the supplied power cable. For further information about this procedure, please contact Shure at 847/866–2200 and ask for the applications department. An AC power adaptor may also be used to power the UP4 from a wall socket or other AC power supply.

– 11 –

Image 13

Contents UP Portable UHF Wireless System User Guide Table of Contents System Operation UC1/UC2/U1/U2 Transmitter SetupSystem Description System FeaturesUC1 UC2 UP4 AUD UP4 Receiver FeaturesUC2 Transmitter Features and Controls UC1 Transmitter Features and ControlsU2 Transmitter Controls & Indicators U1 Transmitter Controls & IndicatorsUP4 Receiver Checking BatteriesUC1 and UC2 Transmitter U1 and U2 TransmitterUC1 or U1 Body-Pack Transmitter Installing BatteriesUC2 or U2 Hand-Held Transmitter UC1Changing the UP4 Receiver Group/Channel Setting Changing Group and Channel SettingsChanging the UC1 or UC2 Transmitter Group/Channel Settings Changing U1 and U2 Transmitter Group/Channel SettingsActivating the Frequency Lock Function U1 and U2 Locking the Power on U1 and U2Attaching The UP4 Receiver Antennas UP4 Receiver SET UPAttaching the Mounting Box to a Camera Attaching a Second Mounting BoxPower Cable Installing the UP4 ReceiverAttaching the WEATHER-RESISTANT Cover Operating the UP System with UC1 or U1 BODY-PACK Adjusting the Transmitter Gain Level Changing the Transmitter SettingsUC1 Attenuator Switch U1 Attenuator SwitchSystem Specifications TroubleshootingTips for Achieving Optimum Performance HAND-HELD Transmitter Specifications BODY-PACK Transmitter SpecificationsUP4 Receiver Specifications Optional Accessories Furnished AccessoriesReplacement Parts Declaration of Conformity Additional Information for this Shure Wireless SystemGarantie Limitée Limited WarrantyBeschränkte Gewährleistung Garantia Limitada