
51
None | No IRQ selected |
|
3 | IRQ 3 selected |
|
4 | IRQ 4 selected |
|
5 | IRQ 5 selected |
|
7 (*) | IRQ 7 selected | (*) = Default setting |
•Note: not all consecutive IRQ numbers from 3 to 15 can be used; to help the selection, the Setup program displays legal IRQ numbers only.
Parallel DMA Channel |
|
|
Option | Description | Note |
None (*) | No DMA selected for the Parallel Port | (*) = Default setting |
0 | DMA Channel 0 selected |
|
1 | DMA Channel 1 selected |
|
3 | DMA Channel 3 selected |
|
Parallel Port Mode
The user according the parallel device connected to the interface can choose The Parallel Port Mode. The default mode is Bidirectional.
Option | Description | Note |
Printer (*) | Standard | (*) = Default setting |
Bidirectional | Bidirectional printer interface |
|
EPP and SPP mode |
| |
EPP and SPP mode |
| |
ECP | ECP mode |
|
ECP and | ECP and EPP mode |
|
ECP and | ECP and EPP mode |
|
ATAPI Units Page
This option concerns about mass storage devices using a standard EIDE interface.
The CPU board has two EIDE controllers, so the ATAPI Units can be separated in two parts: ATAPI Primary and ATAPI Secondary. In any case the options are the same.
•Note: ATAPI (or EIDE) devices can be both hard disks and CD_ROM devices or, sometimes, storage
•Note: each EIDE interface supports two peripherals, called master unit and slave unit. Remember to select as master unit a bootable disk (containing any valid O.S.).
51