SMC Networks TigerCard 1000 manual Secondary Installation

INSTALLING NETWORK DRIVERS

12.Enter the “Workgroup” or “Domain” names (optional) when prompted and click on “Next.”

13.Select “Finish” when prompted, and click on “Yes” when prompted to reboot. Remove the SuperDisk.

Secondary Installation

Follow this procedure if you have already installed another network card or loaded another driver.

1.Be sure to install Windows NT Service Packet 3 or later if it is not already installed.

2.Install the SMC network card (if not already installed), attach the network cable, and boot Windows NT.

3.Double-click on the “My Computer,” “Control Panel,” and “Network” icons. From the “Network” window, select the Adapter tab.

4.Do not select any of the network cards listed. Select “Add.”

5.You are presented with the “Select Network Adapter” window. Click on “Have Disk.”

6.You are presented with the “Insert Disk” window. Specify the path to the root directory of the SuperDisk (e.g., A:\) and click on “OK.”

7.You are presented with the “Select OEM Option” window. Highlight “TigerCard 1000” and click on “OK.”

8.You are presented with the “Network Card Setup” window where you can specify the network card data rate. “AUTONEGOTIATE” is the recommended setting for the TigerCard 10/100 network card. Select “OK” after verifying the network card settings.

2-3