SMC Networks SMCWBR14-N manual Getting Started

Page 15

Installation Considerations

The SMCWBR14-N lets you access your network, using a wireless connection, from virtually anywhere within its operating range. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:

1Keep the number of walls and ceilings between the SMCWBR14-N and other network devices to a minimum - each wall or ceiling can reduce your wireless product’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.

2Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.

3Building Materials can impede the wireless signal - a solid metal door or aluminum studs may have a negative effect on range. Try to position wireless devices and computers with wireless adapters so that the signal passes through drywall or open doorways and not other materials.

4Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate extreme RF noise.

Getting Started

For a typical home setup, you will need a Broadband (Cable/xDSL) Internet service and Modem with Ethernet connection. Consult with your Cable or xDSL provider for proper installation of the modem. Please do the following:

1.Connect your Broadband modem (Cable/xDSL) to the blue WAN port on the Barricade™

2.Connect the network card of your PC to the yellow LAN port on the Barricade™ using the yellow RJ-45 cable provided. Now connect the power adapter.

3.Reboot PC. Start web browser and enter address http://192.168.2.1. When prompted enter password smcadmin then click [Log In]. Note: The User Name must be set to Admin.

4.Click [BASIC], then [Setup Wizard], then [Launch Internet Connection Setup Wizard]. Follow the on screen instructions to complete the set-up and reboot the Barricade™. You are now ready to enjoy your Internet connection.

12

Page 14 Page 16
Image 15
Page 14 Page 16
Contents User Guide Limited Warranty Page Iii CE Mark Declaration of Conformance for EMI and Safety EECImportant Note FCC Radiation Exposure StatementTable of Contents Getting Started with the SMCWBR14-N Package Contents AD-HOCIBSS Network Wireless LAN NetworkingPage Page Roaming in an ESS network diagram Introduction Hardware Overview Front Panel LED’s Getting Started ¾ Click Log Using the Configuration MenuBasicInternet BasicBasicWireless WEP Example WPA-Personal and WPA-EnterpriseWPA-Personal Advanced Optional Backup Radius Server BasicNetwork Settings Act as default router Router SettingsEnable RIP RIP Operating modeEnable Dhcp Server Allow RIP updates from WANRIP Password Dhcp Server SettingsComputer Name Dhcp Lease TimeAlways Broadcast Add/Edit Dhcp ReservationReserve Dhcp Reservations ListNumber of Dynamic Dhcp Clients RevokeAdvancedVirtual Server AdvancedPublic Port Virtual Server Parameters NameProtocol Private PortVirtual Servers List EnableAdd/Edit Virtual Server SaveTrigger Port Range AdvancedSpecial ApplicationsParameters for an Application Rule Example ApplicationAdd/Edit Special Applications Rule Trigger ProtocolInput Port Range Input ProtocolPort Forwarding Fields Name AdvancedGamingGame Rules List TCP Ports To OpenUDP Ports To Open Edit/Add Game RuleAdvancedStreamEngine StreamEngine Setup Enable StreamEngineMeasured Uplink Speed Automatic ClassificationDynamic Fragmentation Automatic Uplink SpeedSource Port Range Add/Edit StreamEngine Rule EnablePriority Source IP RangeAdd/Edit Route AdvancedRoutingRoutes List Policy Table AdvancedAccess ControlPolicy Wizard Add PolicyPage AdvancedWEB Filter Web Filter Parameters Web SiteAdd/Edit Web Site Allowed Web Site List AdvancedMAC Address Filter Enable MAC Address FilterFilter Settings Mode Filter Wireless ClientsFilter Wired Clients Add/Edit MAC AddressMAC Address List AdvancedFirewall Address Restricted Firewall Settings Enable SPINAT Endpoint Filtering Endpoint IndependentDMZ IP Address Enable DMZPptp RtspFTP MMS NetmeetingSIP Wake-On-LANAdvancedInbound Filter Allow All Add/Edit Inbound Filter RuleAction Inbound Filter Rules ListAdvancedAdvanced Wireless WDS Enable 802.11d EnableWMM Enable Extra Wireless ProtectionUPnP Enable UPnPEnable WAN Ping Respond AdvancedNetworkEnable Multicast Streams WAN Port SpeedMulticast Streams Admin Password ToolsAdminRemote Admin Inbound Filter User PasswordEnable Remote Management Remote Admin PortToolsTime Time Zone Time Configuration Current Router TimeEnable Daylight Saving Automatic Time Configuration Enable NTP ServerEnable Logging to Syslog Server ToolsSyslogSyslog Server IP Address ToolsEmail Settings On Schedule PasswordVerify Password Email Log When Full or on Schedule On Log FullReboot The Device Save Settings To Local Hard DriveLoad Settings From Local Hard Drive Restore To Factory Default SettingsCheck Online Firmware UpgradeToolsFirmware Firmware InformationUpload ToolsDynamic DNS Timeout Verify Password or KeyToolsSystem Check ToolsSchedules Schedule Rules List Statistics and Active Sessions StatusDevice infoPage LAN Computers Dhcp ConnectionPPPoE, PPTP, L2TP Connection BigPond ConnectionStatusWireless SignalRate StatusRouting View Levels Apply Log Settings NowStatusLogs What to ViewSave Log RefreshClear Email NowStatusStatistics Errors NAT StatusActive SessionsInternal ExternalSeconds DirOut Time OutAscii AdslBootp CAT DMZ DhcpDNS DSLEAP GUI Ieee HttpHttps IcmpISP IPXL2TP LANLED LPR/LPDMTU MdixMIB MppeOSI NICNTP OfdmPPP RadiusRIP Soho RSASmtp SnmpTftp SsidTCP TCP/IPVlan URLUSB UTPWPA WDSWisp Wlan802.11 Yagi antennaTechnical Support

SMCWBR14-N specifications

The SMC Networks SMCWBR14-N is a wireless router that has established itself as a reliable choice for both home and small office environments. This device is renowned for its balance of performance, flexibility, and cost-effectiveness, making it a popular option among budget-conscious consumers looking for stable connectivity.

One of the primary features of the SMCWBR14-N is its compliance with the IEEE 802.11n wireless standard. This technology allows it to deliver significantly higher data rates than older standards like 802.11g, making it ideal for tasks such as streaming video, online gaming, and large file transfers. It operates on both the 2.4 GHz frequency band, which provides extensive coverage range, and it can reach speeds of up to 300 Mbps. This dual-band functionality ensures that multiple devices can connect simultaneously without significant interference.

The router comes equipped with four 10/100 Mbps Ethernet ports, enabling wired connections for devices such as gaming consoles, desktop computers, and smart TVs. The data transfer rates over wired connections are stable, ensuring low latency and reliable performance, which is essential for users engaged in intensive online activities.

A notable feature of the SMCWBR14-N is its built-in firewall and various security options. This includes Wi-Fi Protected Access (WPA/WPA2) encryption, which significantly enhances the security of the wireless network. The router also supports MAC address filtering, which allows users to define which devices can connect to the network, adding an additional layer of security.

Configuration and management of the SMCWBR14-N are user-friendly, thanks to its web-based interface. Users can easily access the settings via any web browser, allowing for quick adjustments and monitoring of the network. The router supports Quality of Service (QoS) features, enabling users to prioritize bandwidth for specific applications, thus ensuring a smooth operation for real-time activities like VoIP calls and video conferencing.

Furthermore, the SMCWBR14-N supports various advanced features such as DHCP server functionality and dynamic DNS, making it suitable for users who desire a more hands-on approach to their networking setup.

In summary, the SMC Networks SMCWBR14-N wireless router is an excellent choice for individuals and small businesses seeking a robust and versatile networking solution. Its blend of high-speed wireless connectivity, comprehensive security options, and easy management makes it a compelling option for navigating the demands of modern internet usage.
Top Page Image Contents