SMC Networks SMCWBR14-N manual Ppp, Radius, Rip

Page 93

Port

A logical channel endpoint in a network. A computer might have only one physical channel (its Ethernet channel) but can have multiple ports (logical channels) each identified by a number.

PPP

Point-to-Point Protocol is used for two computers to communicate with each over a serial interface, like a phone line

PPPoE

Point-to-Point Protocol over Ethernet is used to connect multiple computers to a remote server over Ethernet

PPTP

Point-to-Point Tunneling Protocol is used for creating VPN tunnels over the Internet between two networks

Preamble

Used to synchronize communication timing between devices on a network

Q

QoS

Quality of Service

R

RADIUS

Remote Authentication Dial-In User Service allows for remote users to dial into a central server and be authenticated in order to access resources on a network

Reboot

To restart a computer and reload it's operating software or firmware from nonvolatile storage.

Rendezvous

Apple's version of UPnP, which allows for devices on a network to discover each other and be connected without the need to configure any settings

Repeater

Retransmits the signal of an Access Point in order to extend it's coverage

RIP

Routing Information Protocol is used to synchronize the routing table of all the routers on a network

RJ-11

The most commonly used connection method for telephones

90

Page 92 Page 94
Image 93
Page 92 Page 94
Contents User Guide Limited Warranty Page Important Note CE Mark Declaration of Conformance for EMI and Safety EECFCC Radiation Exposure Statement IiiTable of Contents Getting Started with the SMCWBR14-N Package Contents AD-HOCIBSS Network Wireless LAN NetworkingPage Page Roaming in an ESS network diagram Introduction Hardware Overview Front Panel LED’s Getting Started ¾ Click Log Using the Configuration MenuBasicInternet BasicBasicWireless WEP Example WPA-Personal and WPA-EnterpriseWPA-Personal Advanced Optional Backup Radius Server BasicNetwork Settings Enable RIP Router SettingsRIP Operating mode Act as default routerRIP Password Allow RIP updates from WANDhcp Server Settings Enable Dhcp ServerAlways Broadcast Dhcp Lease TimeAdd/Edit Dhcp Reservation Computer NameNumber of Dynamic Dhcp Clients Dhcp Reservations ListRevoke ReserveAdvancedVirtual Server AdvancedProtocol Virtual Server Parameters NamePrivate Port Public PortAdd/Edit Virtual Server EnableSave Virtual Servers ListParameters for an Application Rule Example AdvancedSpecial ApplicationsApplication Trigger Port RangeInput Port Range Trigger ProtocolInput Protocol Add/Edit Special Applications RulePort Forwarding Fields Name AdvancedGamingUDP Ports To Open TCP Ports To OpenEdit/Add Game Rule Game Rules ListAdvancedStreamEngine StreamEngine Setup Enable StreamEngineDynamic Fragmentation Automatic ClassificationAutomatic Uplink Speed Measured Uplink SpeedPriority Add/Edit StreamEngine Rule EnableSource IP Range Source Port RangeAdd/Edit Route AdvancedRoutingRoutes List Policy Wizard AdvancedAccess ControlAdd Policy Policy TablePage AdvancedWEB Filter Web Filter Parameters Web SiteAdd/Edit Web Site Allowed Web Site List Filter Settings Mode Enable MAC Address FilterFilter Wireless Clients AdvancedMAC Address FilterFilter Wired Clients Add/Edit MAC AddressMAC Address List AdvancedFirewall NAT Endpoint Filtering Firewall Settings Enable SPIEndpoint Independent Address RestrictedDMZ IP Address Enable DMZPptp RtspFTP SIP NetmeetingWake-On-LAN MMSAdvancedInbound Filter Action Add/Edit Inbound Filter RuleInbound Filter Rules List Allow AllAdvancedAdvanced Wireless WMM Enable 802.11d EnableExtra Wireless Protection WDS EnableEnable WAN Ping Respond Enable UPnPAdvancedNetwork UPnPEnable Multicast Streams WAN Port SpeedMulticast Streams Admin Password ToolsAdminEnable Remote Management User PasswordRemote Admin Port Remote Admin Inbound FilterToolsTime Enable Daylight Saving Time Configuration Current Router TimeAutomatic Time Configuration Enable NTP Server Time ZoneEnable Logging to Syslog Server ToolsSyslogSyslog Server IP Address ToolsEmail Settings Verify Password PasswordEmail Log When Full or on Schedule On Log Full On ScheduleLoad Settings From Local Hard Drive Save Settings To Local Hard DriveRestore To Factory Default Settings Reboot The DeviceToolsFirmware Firmware UpgradeFirmware Information Check OnlineUpload ToolsDynamic DNS Timeout Verify Password or KeyToolsSystem Check ToolsSchedules Schedule Rules List Statistics and Active Sessions StatusDevice infoPage PPPoE, PPTP, L2TP Connection Dhcp ConnectionBigPond Connection LAN ComputersStatusWireless SignalRate StatusRouting StatusLogs Apply Log Settings NowWhat to View View LevelsClear RefreshEmail Now Save LogStatusStatistics Errors Internal StatusActive SessionsExternal NATOut DirTime Out SecondsAscii AdslBootp CAT DMZ DhcpDNS DSLEAP GUI Https HttpIcmp IeeeISP IPXLED LANLPR/LPD L2TPMIB MdixMppe MTUNTP NICOfdm OSIPPP RadiusRIP Smtp RSASnmp SohoTCP SsidTCP/IP TftpUSB URLUTP VlanWisp WDSWlan WPA802.11 Yagi antennaTechnical Support

SMCWBR14-N specifications

The SMC Networks SMCWBR14-N is a wireless router that has established itself as a reliable choice for both home and small office environments. This device is renowned for its balance of performance, flexibility, and cost-effectiveness, making it a popular option among budget-conscious consumers looking for stable connectivity.

One of the primary features of the SMCWBR14-N is its compliance with the IEEE 802.11n wireless standard. This technology allows it to deliver significantly higher data rates than older standards like 802.11g, making it ideal for tasks such as streaming video, online gaming, and large file transfers. It operates on both the 2.4 GHz frequency band, which provides extensive coverage range, and it can reach speeds of up to 300 Mbps. This dual-band functionality ensures that multiple devices can connect simultaneously without significant interference.

The router comes equipped with four 10/100 Mbps Ethernet ports, enabling wired connections for devices such as gaming consoles, desktop computers, and smart TVs. The data transfer rates over wired connections are stable, ensuring low latency and reliable performance, which is essential for users engaged in intensive online activities.

A notable feature of the SMCWBR14-N is its built-in firewall and various security options. This includes Wi-Fi Protected Access (WPA/WPA2) encryption, which significantly enhances the security of the wireless network. The router also supports MAC address filtering, which allows users to define which devices can connect to the network, adding an additional layer of security.

Configuration and management of the SMCWBR14-N are user-friendly, thanks to its web-based interface. Users can easily access the settings via any web browser, allowing for quick adjustments and monitoring of the network. The router supports Quality of Service (QoS) features, enabling users to prioritize bandwidth for specific applications, thus ensuring a smooth operation for real-time activities like VoIP calls and video conferencing.

Furthermore, the SMCWBR14-N supports various advanced features such as DHCP server functionality and dynamic DNS, making it suitable for users who desire a more hands-on approach to their networking setup.

In summary, the SMC Networks SMCWBR14-N wireless router is an excellent choice for individuals and small businesses seeking a robust and versatile networking solution. Its blend of high-speed wireless connectivity, comprehensive security options, and easy management makes it a compelling option for navigating the demands of modern internet usage.
Top Page Image Contents