SMC Networks SMCWBR14-N manual Priority, Source IP Range, Source Port Range, Destination IP Range

Page 36

that every flow defined in a rule receives the expected priority and avoids indeterminate prioritization that could reduce QoS effectiveness.

Name

Create a name for the rule that is meaningful to you.

Priority

The priority of the message flow is entered here -- 1 receives the highest priority (most urgent) and 255 receives the lowest priority (least urgent). Priority 0 is reserved. Flows that are not prioritized by any rule receive lowest priority.

Protocol

The protocol used by the messages. The common choices can be selected from the drop-down menu. To specify any other protocol, enter its protocol number (as assigned by the IANA) in the Protocol box.

Source IP Range

The rule applies to a flow of messages whose LAN-side IP address falls within the range set here.

Source Port Range

The rule applies to a flow of messages whose LAN-side port number is within the range set here.

Destination IP Range

The rule applies to a flow of messages whose WAN-side IP address falls within the range set here.

Destination Port Range

The rule applies to a flow of messages whose WAN-side port number is within the range set here.

Add/Edit StreamEngine Rule

Enable

Each entry in StreamEngine Rules List can be active (enabled) or inactive (disabled)

Save

Saves the new or edited StreamEngine Rule in the following list. When finished updating the StreamEngine rules, you must still click the Save Settings button at the top of the page to make the changes effective and permanent.

StreamEngine Rules List

The section shows the currently defined StreamEngine rules. A StreamEngine rule can be changed by clicking the Edit icon, or deleted by clicking the Delete icon. When you click the Edit icon, the item is highlighted, and the "Edit StreamEngine Rule" section is activated for editing.

33

Page 35 Page 37
Image 36
Page 35 Page 37
Contents User Guide Limited Warranty Page CE Mark Declaration of Conformance for EMI and Safety EEC Important NoteFCC Radiation Exposure Statement IiiTable of Contents Getting Started with the SMCWBR14-N Package Contents Wireless LAN Networking AD-HOCIBSS NetworkPage Page Roaming in an ESS network diagram Introduction Hardware Overview Front Panel LED’s Getting Started Using the Configuration Menu ¾ Click LogBasic BasicInternetBasicWireless WEP Example WPA-Personal and WPA-EnterpriseWPA-Personal Advanced Optional Backup Radius Server BasicNetwork Settings Router Settings Enable RIPRIP Operating mode Act as default routerAllow RIP updates from WAN RIP PasswordDhcp Server Settings Enable Dhcp ServerDhcp Lease Time Always BroadcastAdd/Edit Dhcp Reservation Computer NameDhcp Reservations List Number of Dynamic Dhcp ClientsRevoke ReserveAdvanced AdvancedVirtual ServerVirtual Server Parameters Name ProtocolPrivate Port Public PortEnable Add/Edit Virtual ServerSave Virtual Servers ListAdvancedSpecial Applications Parameters for an Application Rule ExampleApplication Trigger Port RangeTrigger Protocol Input Port RangeInput Protocol Add/Edit Special Applications RuleAdvancedGaming Port Forwarding Fields NameTCP Ports To Open UDP Ports To OpenEdit/Add Game Rule Game Rules ListStreamEngine Setup Enable StreamEngine AdvancedStreamEngineAutomatic Classification Dynamic FragmentationAutomatic Uplink Speed Measured Uplink SpeedAdd/Edit StreamEngine Rule Enable PrioritySource IP Range Source Port RangeAdvancedRouting Add/Edit RouteRoutes List AdvancedAccess Control Policy WizardAdd Policy Policy TablePage AdvancedWEB Filter Web Filter Parameters Web SiteAdd/Edit Web Site Allowed Web Site List Enable MAC Address Filter Filter Settings ModeFilter Wireless Clients AdvancedMAC Address FilterFilter Wired Clients Add/Edit MAC AddressMAC Address List AdvancedFirewall Firewall Settings Enable SPI NAT Endpoint FilteringEndpoint Independent Address RestrictedEnable DMZ DMZ IP AddressPptp RtspFTP Netmeeting SIPWake-On-LAN MMSAdvancedInbound Filter Add/Edit Inbound Filter Rule ActionInbound Filter Rules List Allow AllAdvancedAdvanced Wireless 802.11d Enable WMM EnableExtra Wireless Protection WDS EnableEnable UPnP Enable WAN Ping RespondAdvancedNetwork UPnPEnable Multicast Streams WAN Port SpeedMulticast Streams ToolsAdmin Admin PasswordUser Password Enable Remote ManagementRemote Admin Port Remote Admin Inbound FilterToolsTime Time Configuration Current Router Time Enable Daylight SavingAutomatic Time Configuration Enable NTP Server Time ZoneEnable Logging to Syslog Server ToolsSyslogSyslog Server IP Address ToolsEmail Settings Password Verify PasswordEmail Log When Full or on Schedule On Log Full On ScheduleSave Settings To Local Hard Drive Load Settings From Local Hard DriveRestore To Factory Default Settings Reboot The DeviceFirmware Upgrade ToolsFirmwareFirmware Information Check OnlineUpload ToolsDynamic DNS Verify Password or Key TimeoutToolsSystem Check ToolsSchedules Schedule Rules List StatusDevice info Statistics and Active SessionsPage Dhcp Connection PPPoE, PPTP, L2TP ConnectionBigPond Connection LAN ComputersStatusWireless SignalRate StatusRouting Apply Log Settings Now StatusLogsWhat to View View LevelsRefresh ClearEmail Now Save LogStatusStatistics Errors StatusActive Sessions InternalExternal NATDir OutTime Out SecondsAdsl AsciiBootp CAT Dhcp DMZDNS DSLEAP GUI Http HttpsIcmp IeeeIPX ISPLAN LEDLPR/LPD L2TPMdix MIBMppe MTUNIC NTPOfdm OSIPPP RadiusRIP RSA SmtpSnmp SohoSsid TCPTCP/IP TftpURL USBUTP VlanWDS WispWlan WPAYagi antenna 802.11Technical Support

SMCWBR14-N specifications

The SMC Networks SMCWBR14-N is a wireless router that has established itself as a reliable choice for both home and small office environments. This device is renowned for its balance of performance, flexibility, and cost-effectiveness, making it a popular option among budget-conscious consumers looking for stable connectivity.

One of the primary features of the SMCWBR14-N is its compliance with the IEEE 802.11n wireless standard. This technology allows it to deliver significantly higher data rates than older standards like 802.11g, making it ideal for tasks such as streaming video, online gaming, and large file transfers. It operates on both the 2.4 GHz frequency band, which provides extensive coverage range, and it can reach speeds of up to 300 Mbps. This dual-band functionality ensures that multiple devices can connect simultaneously without significant interference.

The router comes equipped with four 10/100 Mbps Ethernet ports, enabling wired connections for devices such as gaming consoles, desktop computers, and smart TVs. The data transfer rates over wired connections are stable, ensuring low latency and reliable performance, which is essential for users engaged in intensive online activities.

A notable feature of the SMCWBR14-N is its built-in firewall and various security options. This includes Wi-Fi Protected Access (WPA/WPA2) encryption, which significantly enhances the security of the wireless network. The router also supports MAC address filtering, which allows users to define which devices can connect to the network, adding an additional layer of security.

Configuration and management of the SMCWBR14-N are user-friendly, thanks to its web-based interface. Users can easily access the settings via any web browser, allowing for quick adjustments and monitoring of the network. The router supports Quality of Service (QoS) features, enabling users to prioritize bandwidth for specific applications, thus ensuring a smooth operation for real-time activities like VoIP calls and video conferencing.

Furthermore, the SMCWBR14-N supports various advanced features such as DHCP server functionality and dynamic DNS, making it suitable for users who desire a more hands-on approach to their networking setup.

In summary, the SMC Networks SMCWBR14-N wireless router is an excellent choice for individuals and small businesses seeking a robust and versatile networking solution. Its blend of high-speed wireless connectivity, comprehensive security options, and easy management makes it a compelling option for navigating the demands of modern internet usage.
Top Page Image Contents