SMC Networks SMCWBR14-N Router Settings, IP Address, Subnet Mask, Local Domain Name, DNS Relay

Page 23

Router Settings

These are the settings of the LAN (Local Area Network) interface for the router. The router's local network (LAN) settings are configured based on the IP Address and Subnet Mask assigned in this section. The IP address is also used to access this Web-based management interface. It is recommended that you use the default settings if you do not have an existing network.

IP Address

The IP address of your router on the local area network. Your local area network settings are based on the address assigned here. For example, 192.168.2.1.

Subnet Mask

The subnet mask of your router on the local area network.

Local Domain Name

This entry is optional. Enter a domain name for the local network. The router's DHCP server will give this domain name to the computers on the wireless LAN. So, for example, if you enter mynetwork.net here, and you have a wireless laptop with a name of chris, that laptop will be known as chris.mynetwork.net. Note, however, if the router's settings specify "DHCP (Dynamic)" Address, and the router's DHCP server assigns a domain name to the AP, that domain name will override any name you enter here.

DNS Relay

When DNS Relay is enabled, the router plays the role of a DNS server. DNS requests sent to the router are forwarded to the ISP's DNS server. This provides a constant DNS address that LAN computers can use, even when the router obtains a different DNS server address from the ISP upon re-establishing the WAN connection. You should disable DNS relay if you implement a LAN-side DNS server as a virtual server.

RIP (Routing Information Protocol)

Used to broadcast routing information among routers.

Enable RIP

Enable RIP if required by the ISP, if the LAN has multiple routers, or if the LAN has auto-IP devices.

RIP Operating mode

This router supports both version 2 and version 1 of the RIP specification.

V1. Use if none of the routers supports Version 2.

V2 Broadcast. Use if some routers are capable of Version 2, but some are only capable of Version 1.

V2 Multicast. Use if this is the only router on the LAN or if all the routers support Version 2.

Router Metric

The additional cost of routing a packet through this router. The normal value for a simple network is 1. This metric is added to routes learned from other routers; it is not added to static or system routes.

Act as default router

20

Page 22 Page 24
Image 23
Page 22 Page 24
Contents User Guide Limited Warranty Page Iii CE Mark Declaration of Conformance for EMI and Safety EECImportant Note FCC Radiation Exposure StatementTable of Contents Getting Started with the SMCWBR14-N Package Contents AD-HOCIBSS Network Wireless LAN NetworkingPage Page Roaming in an ESS network diagram Introduction Hardware Overview Front Panel LED’s Getting Started ¾ Click Log Using the Configuration MenuBasicInternet BasicBasicWireless WEP WPA-Personal ExampleWPA-Personal and WPA-Enterprise Advanced Optional Backup Radius Server BasicNetwork Settings Act as default router Router SettingsEnable RIP RIP Operating modeEnable Dhcp Server Allow RIP updates from WANRIP Password Dhcp Server SettingsComputer Name Dhcp Lease TimeAlways Broadcast Add/Edit Dhcp ReservationReserve Dhcp Reservations ListNumber of Dynamic Dhcp Clients RevokeAdvancedVirtual Server AdvancedPublic Port Virtual Server Parameters NameProtocol Private PortVirtual Servers List EnableAdd/Edit Virtual Server SaveTrigger Port Range AdvancedSpecial ApplicationsParameters for an Application Rule Example ApplicationAdd/Edit Special Applications Rule Trigger ProtocolInput Port Range Input ProtocolPort Forwarding Fields Name AdvancedGamingGame Rules List TCP Ports To OpenUDP Ports To Open Edit/Add Game RuleAdvancedStreamEngine StreamEngine Setup Enable StreamEngineMeasured Uplink Speed Automatic ClassificationDynamic Fragmentation Automatic Uplink SpeedSource Port Range Add/Edit StreamEngine Rule EnablePriority Source IP RangeAdd/Edit Route AdvancedRoutingRoutes List Policy Table AdvancedAccess ControlPolicy Wizard Add PolicyPage Add/Edit Web Site AdvancedWEB FilterWeb Filter Parameters Web Site Allowed Web Site List AdvancedMAC Address Filter Enable MAC Address FilterFilter Settings Mode Filter Wireless ClientsMAC Address List Filter Wired ClientsAdd/Edit MAC Address AdvancedFirewall Address Restricted Firewall Settings Enable SPINAT Endpoint Filtering Endpoint IndependentDMZ IP Address Enable DMZFTP PptpRtsp MMS NetmeetingSIP Wake-On-LANAdvancedInbound Filter Allow All Add/Edit Inbound Filter RuleAction Inbound Filter Rules ListAdvancedAdvanced Wireless WDS Enable 802.11d EnableWMM Enable Extra Wireless ProtectionUPnP Enable UPnPEnable WAN Ping Respond AdvancedNetworkMulticast Streams Enable Multicast StreamsWAN Port Speed Admin Password ToolsAdminRemote Admin Inbound Filter User PasswordEnable Remote Management Remote Admin PortToolsTime Time Zone Time Configuration Current Router TimeEnable Daylight Saving Automatic Time Configuration Enable NTP ServerSyslog Server IP Address Enable Logging to Syslog ServerToolsSyslog ToolsEmail Settings On Schedule PasswordVerify Password Email Log When Full or on Schedule On Log FullReboot The Device Save Settings To Local Hard DriveLoad Settings From Local Hard Drive Restore To Factory Default SettingsCheck Online Firmware UpgradeToolsFirmware Firmware InformationUpload ToolsDynamic DNS Timeout Verify Password or KeyToolsSystem Check ToolsSchedules Schedule Rules List Statistics and Active Sessions StatusDevice infoPage LAN Computers Dhcp ConnectionPPPoE, PPTP, L2TP Connection BigPond ConnectionRate StatusWirelessSignal StatusRouting View Levels Apply Log Settings NowStatusLogs What to ViewSave Log RefreshClear Email NowStatusStatistics Errors NAT StatusActive SessionsInternal ExternalSeconds DirOut Time OutAscii AdslBootp CAT DMZ DhcpEAP DNSDSL GUI Ieee HttpHttps IcmpISP IPXL2TP LANLED LPR/LPDMTU MdixMIB MppeOSI NICNTP OfdmRIP PPPRadius Soho RSASmtp SnmpTftp SsidTCP TCP/IPVlan URLUSB UTPWPA WDSWisp Wlan802.11 Yagi antennaTechnical Support

SMCWBR14-N specifications

The SMC Networks SMCWBR14-N is a wireless router that has established itself as a reliable choice for both home and small office environments. This device is renowned for its balance of performance, flexibility, and cost-effectiveness, making it a popular option among budget-conscious consumers looking for stable connectivity.

One of the primary features of the SMCWBR14-N is its compliance with the IEEE 802.11n wireless standard. This technology allows it to deliver significantly higher data rates than older standards like 802.11g, making it ideal for tasks such as streaming video, online gaming, and large file transfers. It operates on both the 2.4 GHz frequency band, which provides extensive coverage range, and it can reach speeds of up to 300 Mbps. This dual-band functionality ensures that multiple devices can connect simultaneously without significant interference.

The router comes equipped with four 10/100 Mbps Ethernet ports, enabling wired connections for devices such as gaming consoles, desktop computers, and smart TVs. The data transfer rates over wired connections are stable, ensuring low latency and reliable performance, which is essential for users engaged in intensive online activities.

A notable feature of the SMCWBR14-N is its built-in firewall and various security options. This includes Wi-Fi Protected Access (WPA/WPA2) encryption, which significantly enhances the security of the wireless network. The router also supports MAC address filtering, which allows users to define which devices can connect to the network, adding an additional layer of security.

Configuration and management of the SMCWBR14-N are user-friendly, thanks to its web-based interface. Users can easily access the settings via any web browser, allowing for quick adjustments and monitoring of the network. The router supports Quality of Service (QoS) features, enabling users to prioritize bandwidth for specific applications, thus ensuring a smooth operation for real-time activities like VoIP calls and video conferencing.

Furthermore, the SMCWBR14-N supports various advanced features such as DHCP server functionality and dynamic DNS, making it suitable for users who desire a more hands-on approach to their networking setup.

In summary, the SMC Networks SMCWBR14-N wireless router is an excellent choice for individuals and small businesses seeking a robust and versatile networking solution. Its blend of high-speed wireless connectivity, comprehensive security options, and easy management makes it a compelling option for navigating the demands of modern internet usage.
Top Page Image Contents