SMC Networks SMCWBR14-N manual Wireless LAN Networking, AD-HOCIBSS Network

Page 8

Wireless LAN Networking

This section provides background information on wireless LAN networking technology. Consult the Glossary for definitions of the terminology used in this section.

THE INFORMATION IN THIS SECTION IS FOR YOUR REFERENCE. CHANGING

NETWORK SETTINGS AND PARTICULARLY SECURITY SETTTINGS SHOULD ONLY

BE DONE BY AN AUTHORIZED ADMINISTRATOR.

Transmission Rate (Transfer Rate)

The SMCWBR14-N provides various transmission (data) rate options for you to select. In most networking scenarios, the factory default Best (automatic) setting proves the most efficient. This setting allows your SMCWBR14-N to operate at the maximum transmission (data) rate. When the communication quality drops below a certain level, the SMCWBR14-N automatically switches to a lower transmission (data) rate. Transmission at lower data speeds is usually more reliable.

However, when the communication quality improves again, the SMCWBR14-N gradually increases the transmission (data) rate again until it reaches the highest available transmission rate.

Types of Wireless Networks

Wireless LAN networking works in either of the two modes: ad-hoc and infrastructure. In infra- structure mode, wireless devices communicate to a wired LAN via access points. Each access point and its wireless devices are known as a Basic Service Set (BSS). An Extended Service Set (ESS) is two or more BSSs in the same subnet. In ad hoc mode (also known as peer-to-peer mode), wireless devices communicate with each other directly and do not use an access point. This is an Independent BSS (IBSS).

To connect to a wired network within a coverage area using access points, set the operation mode to Infrastructure (BSS). To set up an independent wireless workgroup without an access point, use Ad-hoc (IBSS) mode.

AD-HOC(IBSS) NETWORK

Ad-hoc mode does not require an access point or a wired network. Two or more wireless stations communicate directly to each other. An ad-hoc network may sometimes be referred to as an Independent Basic Service Set (IBSS).

To set up an ad-hoc network, configure all the stations in ad-hoc mode. Use the same SSID and channel for each station.

5

Image 8
Contents User Guide Limited Warranty Page CE Mark Declaration of Conformance for EMI and Safety EEC Important NoteFCC Radiation Exposure Statement IiiTable of Contents Getting Started with the SMCWBR14-N Package Contents Wireless LAN Networking AD-HOCIBSS NetworkPage Page Roaming in an ESS network diagram Introduction Hardware Overview Front Panel LED’s Getting Started Using the Configuration Menu ¾ Click LogBasic BasicInternetBasicWireless WEP WPA-Personal ExampleWPA-Personal and WPA-Enterprise Advanced Optional Backup Radius Server BasicNetwork Settings Router Settings Enable RIPRIP Operating mode Act as default routerAllow RIP updates from WAN RIP PasswordDhcp Server Settings Enable Dhcp ServerDhcp Lease Time Always BroadcastAdd/Edit Dhcp Reservation Computer NameDhcp Reservations List Number of Dynamic Dhcp ClientsRevoke ReserveAdvanced AdvancedVirtual ServerVirtual Server Parameters Name ProtocolPrivate Port Public PortEnable Add/Edit Virtual ServerSave Virtual Servers ListAdvancedSpecial Applications Parameters for an Application Rule ExampleApplication Trigger Port RangeTrigger Protocol Input Port RangeInput Protocol Add/Edit Special Applications RuleAdvancedGaming Port Forwarding Fields NameTCP Ports To Open UDP Ports To OpenEdit/Add Game Rule Game Rules ListStreamEngine Setup Enable StreamEngine AdvancedStreamEngineAutomatic Classification Dynamic FragmentationAutomatic Uplink Speed Measured Uplink SpeedAdd/Edit StreamEngine Rule Enable PrioritySource IP Range Source Port RangeAdvancedRouting Add/Edit RouteRoutes List AdvancedAccess Control Policy WizardAdd Policy Policy TablePage Add/Edit Web Site AdvancedWEB FilterWeb Filter Parameters Web Site Allowed Web Site List Enable MAC Address Filter Filter Settings ModeFilter Wireless Clients AdvancedMAC Address FilterMAC Address List Filter Wired ClientsAdd/Edit MAC Address AdvancedFirewall Firewall Settings Enable SPI NAT Endpoint FilteringEndpoint Independent Address RestrictedEnable DMZ DMZ IP AddressFTP PptpRtsp Netmeeting SIPWake-On-LAN MMSAdvancedInbound Filter Add/Edit Inbound Filter Rule ActionInbound Filter Rules List Allow AllAdvancedAdvanced Wireless 802.11d Enable WMM EnableExtra Wireless Protection WDS EnableEnable UPnP Enable WAN Ping RespondAdvancedNetwork UPnPMulticast Streams Enable Multicast StreamsWAN Port Speed ToolsAdmin Admin PasswordUser Password Enable Remote ManagementRemote Admin Port Remote Admin Inbound FilterToolsTime Time Configuration Current Router Time Enable Daylight SavingAutomatic Time Configuration Enable NTP Server Time ZoneSyslog Server IP Address Enable Logging to Syslog ServerToolsSyslog ToolsEmail Settings Password Verify PasswordEmail Log When Full or on Schedule On Log Full On ScheduleSave Settings To Local Hard Drive Load Settings From Local Hard DriveRestore To Factory Default Settings Reboot The DeviceFirmware Upgrade ToolsFirmwareFirmware Information Check OnlineUpload ToolsDynamic DNS Verify Password or Key TimeoutToolsSystem Check ToolsSchedules Schedule Rules List StatusDevice info Statistics and Active SessionsPage Dhcp Connection PPPoE, PPTP, L2TP ConnectionBigPond Connection LAN ComputersRate StatusWirelessSignal StatusRouting Apply Log Settings Now StatusLogsWhat to View View LevelsRefresh ClearEmail Now Save LogStatusStatistics Errors StatusActive Sessions InternalExternal NATDir OutTime Out SecondsAdsl AsciiBootp CAT Dhcp DMZEAP DNSDSL GUI Http HttpsIcmp IeeeIPX ISPLAN LEDLPR/LPD L2TPMdix MIBMppe MTUNIC NTPOfdm OSIRIP PPPRadius RSA SmtpSnmp SohoSsid TCPTCP/IP TftpURL USBUTP VlanWDS WispWlan WPAYagi antenna 802.11Technical Support

SMCWBR14-N specifications

The SMC Networks SMCWBR14-N is a wireless router that has established itself as a reliable choice for both home and small office environments. This device is renowned for its balance of performance, flexibility, and cost-effectiveness, making it a popular option among budget-conscious consumers looking for stable connectivity.

One of the primary features of the SMCWBR14-N is its compliance with the IEEE 802.11n wireless standard. This technology allows it to deliver significantly higher data rates than older standards like 802.11g, making it ideal for tasks such as streaming video, online gaming, and large file transfers. It operates on both the 2.4 GHz frequency band, which provides extensive coverage range, and it can reach speeds of up to 300 Mbps. This dual-band functionality ensures that multiple devices can connect simultaneously without significant interference.

The router comes equipped with four 10/100 Mbps Ethernet ports, enabling wired connections for devices such as gaming consoles, desktop computers, and smart TVs. The data transfer rates over wired connections are stable, ensuring low latency and reliable performance, which is essential for users engaged in intensive online activities.

A notable feature of the SMCWBR14-N is its built-in firewall and various security options. This includes Wi-Fi Protected Access (WPA/WPA2) encryption, which significantly enhances the security of the wireless network. The router also supports MAC address filtering, which allows users to define which devices can connect to the network, adding an additional layer of security.

Configuration and management of the SMCWBR14-N are user-friendly, thanks to its web-based interface. Users can easily access the settings via any web browser, allowing for quick adjustments and monitoring of the network. The router supports Quality of Service (QoS) features, enabling users to prioritize bandwidth for specific applications, thus ensuring a smooth operation for real-time activities like VoIP calls and video conferencing.

Furthermore, the SMCWBR14-N supports various advanced features such as DHCP server functionality and dynamic DNS, making it suitable for users who desire a more hands-on approach to their networking setup.

In summary, the SMC Networks SMCWBR14-N wireless router is an excellent choice for individuals and small businesses seeking a robust and versatile networking solution. Its blend of high-speed wireless connectivity, comprehensive security options, and easy management makes it a compelling option for navigating the demands of modern internet usage.