SMC Networks EX500-AP -S, EX250-SEN1 Part Names Dimensions unit mm, Output Block Power Block

Part Names	Dimensions ( unit : mm )
Output Block	Output Block	Power Block

		Tie-rod (2 pcs.)
		Accessory
No.	Part names	Application
1	Output equipment connector	Connects with output device. Note1)
2	Operation display LED	Indicates the output status. Note2)

Note1 : For wiring method, refer to subsection "Wiring" (page 26) of section "EX9 Series Output Block/Power Block" in this manual.

Note2 : For display, refer to subsection "Display" (page 30) of section "EX9 Series Output Block/Power Block" in this manual.

Power Block

		Tie-rod (2 pcs.)	Waterproof cap
		Accessory	(for socket)(1 pc.)
No.	Part names		Application
1	Power supply connector	Power can be supplied to SI Unit when connecting
		SI Unit next to Power Block. Note1)
2	Power input connector	Supplies power for output devices. Note1)
3	Operation display LED	Indicates the power supply status. Note2)

Note1 : For wiring method, refer to subsection "Wiring" (page 28) of section "EX9 Series Output Block/Power Block" in this manual.

Note2 : For display, refer to subsection "Display" (page 30) of section "EX9 Series Output Block/Power Block" in this manual.

72.6 80.3

59.8

21

PWR

59.8

21

Mounting/Installation

Refer to subsection "Mounting/Installation" (page 7) in this manual.

Specifications

Output Block

Model No.	EX9-OET1		EX9-OEP1
Power supply			External power supply type
	Internal power supply type		(Supplied from the Power Block,
type
			EX9-PE1.)
Rated voltage			24VDC
Output method		PNP output (-COM.)
Rated load	Max. 62mA/point		Max. 0.5A/point NOTE)
current

* It is limited to the max. Power Block supply current 3.1A.

NOTE

When connecting an inductive load such as a solenoid valve or relay without built-in surge sup- pressor, the use of an external surge suppressor is recommended.

24 25