SMC Networks EX9-AC020EN-PSRJ, EX500-AP -S Power supply wiring Power Block, EX9-PE1 pin layout

Wiring ( continued )

Power supply wiring (Power Block)

When operating EX9-OEP1, combine it with EX9-PE1, and connect the power supply to the power input connector of EX9-PE1.

Cable wiring

Aligning the key groove with the connector of Power Block, plug in the cable.

Pin alignment and connection drawing of the Power Supply Cable

Power Cable (Power Block)

48.1

M126.4 φ

30 5

50

Tighten the lock nut on cable side by turning it clockwise by hand.

Confirm that the connector does not move.

	Model No. : EX9-AC -1
Pin No	Cable color: Signal name
1	Brown : Power supply for output (24VDC)
2	White : Power supply for output (0V)
3	Blue : (Power supply to sensor (24VDC))
4	Black :(Power supply to sensor (0V))
5	Grey : Earth

12

5

43

Socket connector pin layput ( Reverse key )

EX9-PE1 pin layout

M12 connector, 5 pin, Reverse key

Power Cable Jumper (Power Block to EX250-SEN1)

	200
52		48.1
M12	φ6.4	M12

1Power supply for output (24VDC)

2Power supply for output (0VDC)

12

Power supply connector (Socket)

Power input connector

Model No. : EX9-AC002-3

( 3 Power supply for sensor (24VDC)) * ( 4 Power supply for sensor (0V)) *

5 Ground

5

43

1 2

5

4 3

(Plug)

		Terminal No.
1	2	1
		2

3

5	4
	5

43

Plug connector pin layput ( Reverse key )

Terminal No. Cable color

1 Brown 1 2

2White

3Blue

4 Black 5

5Grey

4 3

Wiring diagram Socket connector pin layout

*It is used when power is supplied to SI Unit, using an exclusive cable from the power supply connector.

When power is not supplied to the SI Unit from the Power Block, it is not required to connect the power to the pins No. and of the power input connector.

28 29