Connecting External Components
Connecting an External Digital Component
Example: Digital signal components such as a DVD or CD Recorder.
Optical Cable (not included)
Connecting an External Analog Component
Example: Analog signal components such as a VCR, Camcorder, and TV.
CONNECTIONS
VIDEO IN | VIDEO OUT DIGITAL OUT |
Audio Cable
If the external
analog component has only one Audio Out, connect either left or right.
L
Video Cable
R
VIDEO IN | VIDEO OUT |
1 Connect Video Out on the DVD player to Video In on the TV.
2 Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component.
3 Press AUX on the remote control to select ‘DIGITAL IN’.
•Each time the button is pressed, the selection changes as follows: DIGITAL IN ➝ AUX 1 ➝ AUX 2.
•You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX1 ➝ AUX2 ➝ FM ➝ AM.
15
1 Connect Video Out on the DVD player to Video In on the TV.
2 Connect Video In on the DVD player to Video Out on the external analog component.
3 Connect Audio In on the DVD player to Audio Out on the external analog component.
•Be sure to match connector colors.
4 Press AUX on the remote control to select AUX 1 or AUX 2.
•Each time the button is pressed, the selection changes as follows: DIGITAL IN AUX 1 AUX 2.
•You can also use the FUNCTION button on the main unit. The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX1 ➝ AUX2 ➝ FM ➝ AM.
Note |
•If you have connected an external digital component and Video In (1, 2) at the same time, there will be video from AUX 1 even when you select DIGITAL IN.
•If you have connected Audio In (L, R) to 1, connect Video In to 1 as well, and if you have connected Audio In (L, R) to 2, connect Video In to 2 also.
16