JVC AV-29TX1EP, AV-29TX1EPS manual Connecting an Audio System, Do the following before connecting

Connecting an Audio System

You can use your audio system as front speakers instead of the front speakers on the TV.

Caution:

Do the following before connecting,

•Turn the power of all the equipment off.

•Set the amplifier volume to low.

•Read the manuals provided with the amplifiers and speakers.

1: Stereo amplifier

2: Front speakers (Magnetic-shielded Type, L, R)

L

R

AUDIO OUT

(Terminals on rear)

Notes:

•Use the AUDIO OUT terminals for connecting an audio system.

The volume output is controlled via the TV and The AU- DIO OUT terminal output is not interrupted by head- phone connection.

•Use magnetic-shielded speakers for front speakers 2 to prevent interference by the TV.

5Press / to choose SPEAKER and press

/ to choose OFF. Then press OK .

To output sound from the TV speakers:

Set SPEAKER to ON.

6 Press OK .

This completes the settings.

7Turn the stereo amplifier on and re-adjust the volume setting, then press / to adjust the volume.

Note:

•Setting the volume of the stereo amplifier too high may damage the speakers.

ENGLISH

1Connect your stereo amplifier 1 to the AUDIO

OUT terminals.

2Turn the TV on and set the volume to the low- est setting.

3Press OK .

The MENU appears.

4Press / to choose SOUND SETTING. Then press OK .

The Sound Setting menu appears.

MENU
SOUND SETTING
STEREO/I•II		0
BASS
TREBLE
BALANCE
HYPER SOUND		OFF	ON
SPEAKER		OFF	ON
TV	OK

27