JVC AV-29TX1EP, AV-29TX1EPS manual Picture Features, Digital VNR, DigiPure, Colour System

Picture Features

MENU

PICTURE FEATURES

DIGITAL VNR		OFF	ON
DigiPure		OFF	ON
COLOUR SYSTEM
TV	OK

1Display MENU.

MENU

OK

2Choose PICTURE FEATURES.

P

P

3Display the Picture Features menu.

MENU

OK

Digital VNR

When you set the Digital VNR to ON, you can reduce the noise on the screen to improve picture quality further.

1Press / to choose DIGITAL VNR.

2Press / to choose ON.

• To cancel the Digital VNR, choose OFF.

3Press OK .

This completes the setting.

DigiPure

When the DigiPure is set to ON, optimum edge compensation is applied to each portion of the same picture through digital edge compensation. Thus, Clear and natural looking images are obtained.

1Press / to choose DigiPure.

2Press / to choose ON.

• To cancel the DigiPure, choose OFF.

3Press OK .

This completes the setting.

Notes:

•Set the DigiPure to ON normally.

•The DigiPure setting can be changed using the buttons

on the TV's front panel. Pressing the button for 5 seconds or longer causes the current DigiPure setting to be displayed. Change the DigiPure setting while it is be- ing displayed using the - / + buttons.

Colour System

The colour system is automatically chosen, but if the picture is not clear or no colour appears, choose the colour system manually.

1Press / to choose COLOUR SYSTEM. Then Press OK .

.

COLOUR SYSTEM

PAL

TV OK

2Press / to choose the appropriate colour system.

PAL:

PAL system.

SECAM: SECAM system.

NTSC3.58:

NTSC 3.58 MHz system.

NTSC4.43:

NTSC 4.43 MHz system.

AUTO:

Automatic colour system selection.

Notes:

•The AUTO may not function properly with poor sig- nal quality. If the picture is abnormal in AUTO mode, choose another colour system manually.

•When in the TV mode (PR 1 to PR 99), you cannot choose AUTO, NTSC 3.58 or NTSC 4.43.

•When in the TV mode (PR 0), you cannot choose NTSC 3.58 or NTSC 4.43.

3 Press OK .

This completes the setting.

16