JVC AV-29TX1EP, AV-29TX1EPS manual ACI Operation, When a T-V Link compatible VCR is connected

Preparation

AUTO PROGRAM
	CH 10
20%
TV	OK

EDIT
PR	ID	CH/CC
AV
01	BBC1	CH	21
02		CH	22
03		CH	23
04		CH	24
05		CH	25
06		CH	26
07		CC	01
08		CC	02
09		CC	03
TV	OK		ID
	MOVE		INSERT
			DELETE
			MANUAL

Note:

•If a station you want to view is not set to a PR channel, manual- ly set it using the Edit menu. (See page 22.)

When the ACI menu is displayed:

If your Cable TV station supports ACI (Automatic Channel Installation), the ACI menu is displayed. Please operate it according to the “ACI Op- eration” procedures at the bottom of this page. The channel is set quickly to the PR channel according to the order decided for all the channels.

7 Press	OK to exit the Edit menu.
MENU	The T-V LINK menu is displayed.
OK

T-V LINK

DOWNLOAD TV VCR

TV OK

EXIT

■When a T-V LINK compatible VCR is connected

8	Turn the VCR on.
9	Press	OK .
	MENU
	OK	TRANSFER

■When a T-V LINK compatible VCR is not connected

8	Press	TV .
	TV	The menu disappears.
		This completes the Initial Settings

procedure.

The transmission of PR channel data from the TV to the VCR begins. The display disappears once the data trans- mission ends.

This completes the Initial Setting procedure.

Notes:

•For details about T-V LINK, refer to page 5.

•Depending on the type of VCR, the display may change once data transmission ends. In this case, refer to the VCR’s In- struction manual.

ACI Operation

1Press / to choose your area.

2Press OK .

“ACI” is displayed in the AUTO PROGRAM menu and the ACI starts. The EDIT menu is displayed after the channels have been set.

If “ACI ERROR” is displayed, press OK to re-start the ACI.

•If “ACI ERROR” is displayed anyway, press and cancel ACI, then start the ordinary Auto Programming.

Note:

•The ACI may not work correctly if you don’t have good reception.

4