JVC AV-29TX1EP, AV-29TX1EPS manual Preparation, Connecting the Aerial and VCR

Preparation

1 Connecting the Aerial and VCR

If connecting a VCR, follow A → B → C → D.

If not connecting a VCR, follow 1 → 2.

Notes:

AC Outlet

(AC 220 – 240 V, 50 Hz)

Power Cord

L

R

AUDIO OUT

VHF/UHF Aerial

75-ohm Coaxial Cable

Aerial Plug

EXT-1	EXT-2	EXT-3
		S

*1

•For further details, refer to the manuals provided with the devic- es to be connected.

•The connecting cables are not provided.

•A video can be viewed from the VCR without performing C. For details, refer to the VCR manual.

•The shaded Items are not provided.

•To connect additional external de- vices, please refer to page 26.

•To connect an audio system, please refer to page 27.

*1 This TV is T-V LINK compatible. To operate T-V LINK, a T-V LINK compatible VCR must be con- nected to the EXT-2 Terminal on the TV.

Notes:

21-pin Scart Cable

Aerial Plug

75-ohm Coaxial Cable

VCR/S-VHS VCR

To Aerial

Input

•For details about T-V LINK, re- fer to page 5.

•When a decoder is connected to a T-V LINK compatible VCR, set the Decoder (EXT-2) in the Fea- tures menu to ON. (See “De- coder (EXT-2)” on page 20.) Otherwise, you will not be able to view scrambled channels.

AV IN/OUT Terminal

Aerial Plug

To Aerial

Output

2 Putting Batteries into the Remote Control

Use two AAA/R03 dry cell batteries.

Insert the batteries from the á end, making sure the » and á polarities are correct.

To open the battery compartment, slide the door downwards and lift off, replace by sliding the door upwards until it is secure.

Notes:

•Follow the warnings printed on the batteries.

•Battery life is about six months to one year, depending on fre- quency of use.

•If the remote control doesn’t work properly, replace the bat- teries.

•The batteries we supply are only for setting up and testing your TV, please replace them as soon as necessary.

•Always use good quality batter- ies.

2