Talkswitch CT.TS005.002606 manual Talkswitch Voip Network, TalkSwitch VoIP network

Page 14

TALKSWITCH VOIP NETWORK

A TalkSwitch VoIP network has at least one SIP device at each location. A SIP device is a VoIP-enabled TalkSwitch unit, IP telephone or SIP gateway. One TalkSwitch unit in the network acts as the SIP server. The other SIP devices are SIP clients.

A user, auto attendant or call cascade can dial a three-digit VoIP number (ranging from 250 to 299) to reach an extension, auto attendant or voice mailbox at any location.

For example, the following illustration shows a TalkSwitch VoIP network with two locations. Calls between the offices are routed over the Internet, and local calls are routed over the traditional telephone network.

Figure 3: TalkSwitch VoIP network

Five VoIP numbers are assigned to San Francisco (251 to 255), and nine are assigned to New York (261 to 269). These VoIP numbers can be dialed directly from any extension, auto attendant or call cascade in the network.

The TalkSwitch unit in the San Francisco office has a static public IP address, so is designated as the SIP server. The TalkSwitch unit in New York is a SIP client.

Before proceeding, ensure you have:

•Connected the TalkSwitch system at each location to a network (see page 3).

•Configured local and public IP addresses (page 4).

•Configured the router (page 7).

E V E R Y C A L L C O U N T S

1 3

Image 14

Contents Release About this guide Where to go for further informationIntroduction DocumentationSelecting a location for the SIP server About VoipAbout SIP servers Connecting a VoIP gateway Connecting to a NetworkConnecting to local and IP networks Confirming network capacitySetting the system IP settings Configuring IP AddressesStarting the TalkSwitch management software E R Y C a L L C O U N T S Setting the public IP address Configuring the Router I P N E T W O R K C O N F I G U R a T I O N G U I D E Configuring the router manually I P N E T W O R K C O N F I G U R a T I O N G U I D E External IP Extensions External IP extensionsSelect the Local Extension/Fax Talkswitch Voip Network TalkSwitch VoIP networkSetting UP a Talkswitch Profile for the SIP Server Select the VoIP ConfigurationSetting UP a Talkswitch Profile for a SIP Client Configuring Voip Numbers for a Talkswitch Voip Network Saving Settings to Talkswitch Setting UP Line Hunt GroupsAdvanced Voip Configuration Verifying the Talkswitch Voip Network Service Provider Voip Network Service provider VoIP networkSetting UP a Service Provider Profile Setting Codec Options Click Settings. The Keep Alive Settings window appearsSelect the VoIP Configuration Configuring Voip Numbers for a Service Provider Voip Network Set Line type to TalkSwitch VoIP or SPn VoIP Service Setting up caller ID Reserving VoIP lines Verifying Registration Appendix a Talkswitch Voip Network Administration Form VoIP numbers assigned to locations