Talkswitch CT.TS005.002606 manual Setting UP a Talkswitch Profile for a SIP Client

Page 16

SETTING UP A TALKSWITCH PROFILE FOR A SIP CLIENT

The TalkSwitch profile for a SIP client contains registration details and authentication information.

1.Start the TalkSwitch management software, and connect to the TalkSwitch system that will act as the SIP client.

2.Select the VoIP Configuration page.

3.Select Profile TS, which is for configuring the TalkSwitch profile.

Y Z

[ \

]

^

4.Leave the This TalkSwitch location is the proxy/registrar check box cleared.

5.Enter the Current public IP address or Fully qualified domain name (FQDN) of the SIP server into the Proxy/registrar server name box.

If the SIP server is using a non-default SIP signalling port (i.e. if the SIP server is not using 5060 as the SIP signalling port), specify the port number after a colon at the end of the public IP address or FQDN (e.g. 123.45.67.89:3456).

6.Enter the User/account name from the SIP server. All SIP clients must use this name.

7.Enter the Password from the SIP server. All SIP clients must use this password.

E V E R Y C A L L C O U N T S

1 5

Image 16

Contents Release Where to go for further information IntroductionAbout this guide DocumentationAbout SIP servers About VoipSelecting a location for the SIP server Connecting to a Network Connecting to local and IP networksConnecting a VoIP gateway Confirming network capacityStarting the TalkSwitch management software Configuring IP AddressesSetting the system IP settings E R Y C a L L C O U N T S Setting the public IP address Configuring the Router I P N E T W O R K C O N F I G U R a T I O N G U I D E Configuring the router manually I P N E T W O R K C O N F I G U R a T I O N G U I D E External IP Extensions External IP extensions Select the Local Extension/Fax Talkswitch Voip Network TalkSwitch VoIP networkSetting UP a Talkswitch Profile for the SIP Server Select the VoIP ConfigurationSetting UP a Talkswitch Profile for a SIP Client Configuring Voip Numbers for a Talkswitch Voip Network Advanced Voip Configuration Setting UP Line Hunt GroupsSaving Settings to Talkswitch Verifying the Talkswitch Voip Network Service Provider Voip Network Service provider VoIP networkSetting UP a Service Provider Profile Setting Codec Options Click Settings. The Keep Alive Settings window appearsSelect the VoIP Configuration Configuring Voip Numbers for a Service Provider Voip Network Set Line type to TalkSwitch VoIP or SPn VoIP Service Setting up caller ID Reserving VoIP lines Verifying Registration Appendix a Talkswitch Voip Network Administration Form VoIP numbers assigned to locations