Talkswitch CT.TS005.002606 manual Setting UP Line Hunt Groups, Advanced Voip Configuration

Page 18

SETTING UP LINE HUNT GROUPS

IMPORTANT: Ensure at least one line hunt group uses telephone lines that can reach emergency services.

If a VoIP-enabled TalkSwitch unit is present, line hunt group 88 uses the TalkSwitch VoIP network by default, and the other line hunt groups use telephone lines. You can modify these default settings as described on page 24.

Note that the user does not have to dial the line hunt group number before VoIP numbers 250–299: these automatically use the TalkSwitch VoIP network.

If 50 VoIP numbers aren’t enough for the network, you can set up longer VoIP numbers. To reach a longer VoIP number, the user will first dial a line hunt group number.

A local extension can be restricted to a set of line hunt groups in order to control access to VoIP networks. See Hunt group permissions in Chapter 2 of the TalkSwitch User Guide.

ADVANCED VOIP CONFIGURATION

Optionally, perform advanced VoIP configuration.

1.The default preferred codec is G.729. You can select the Preferred codec for the TalkSwitch profile. All locations must use the same codec. See Setting codec options on page 21.

2.VoIP calls use extension names for caller ID by default. You can set the source for VoIP caller ID at each location. The same setting will be used by the TalkSwitch profile and all service provider profiles. See Setting up caller ID on page 25.

3.All VoIP lines are shared by default. You can reserve VoIP lines for the TalkSwitch profile at each location. See Reserving VoIP lines on page 26.

SAVING SETTINGS TO TALKSWITCH

To transfer settings from your computer to the TalkSwitch system, choose File > Save. A window appears indicating the configuration is being sent.

E V E R Y C A L L C O U N T S

1 7

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Release About this guide Where to go for further informationIntroduction DocumentationAbout Voip About SIP serversSelecting a location for the SIP server Connecting a VoIP gateway Connecting to a NetworkConnecting to local and IP networks Confirming network capacityConfiguring IP Addresses Starting the TalkSwitch management softwareSetting the system IP settings E R Y C a L L C O U N T S Setting the public IP address Configuring the Router I P N E T W O R K C O N F I G U R a T I O N G U I D E Configuring the router manually I P N E T W O R K C O N F I G U R a T I O N G U I D E External IP Extensions External IP extensionsSelect the Local Extension/Fax Talkswitch Voip Network TalkSwitch VoIP networkSetting UP a Talkswitch Profile for the SIP Server Select the VoIP ConfigurationSetting UP a Talkswitch Profile for a SIP Client Configuring Voip Numbers for a Talkswitch Voip Network Setting UP Line Hunt Groups Advanced Voip ConfigurationSaving Settings to Talkswitch Verifying the Talkswitch Voip Network Service Provider Voip Network Service provider VoIP networkSetting UP a Service Provider Profile Setting Codec Options Click Settings. The Keep Alive Settings window appearsSelect the VoIP Configuration Configuring Voip Numbers for a Service Provider Voip Network Set Line type to TalkSwitch VoIP or SPn VoIP Service Setting up caller ID Reserving VoIP lines Verifying Registration Appendix a Talkswitch Voip Network Administration Form VoIP numbers assigned to locations
Top Page Image Contents