Seagate Medalist 17242 manual ST317242A ST313032A

Page 11

Medalist 17242, 13032, 10232, 8422 and 4312, Rev. A					3

Drive Specification	ST317242A	ST313032A	ST310232A	ST38422A	ST34312A

Length (mm max)		147.00

Weight
(grams typical)		558


Track-to-track seek
time (msec typical)		1.3 (read), 2.1 (write)

Average seek time
(msec typical)		9.0 (read), 10.5 (write)

Full-stroke seek time
(msec typical)		18 (read), 20 (write)

Average latency
(msec)		5.6

Power-on to ready
(sec typical)		12

Standby to ready
(sec typical)		12

Startup current:
12V (peak)			2.2 amps
5V (RMS)			0.6 amps
5V (RMS)

Seek power and
current (mean)			8.5 watts

Read/Write power
and current (typical)			5.5 watts

Idle mode power and
current (typical)			5.5 watts

Standby mode pow-
er and current			1.1 watts
(typical)

Sleep mode power
and current (typical)			1.1 watts

Voltage tolerance			5V ± 5%
(including noise)			12V ± 10%

Ambient
temperature		0° to 55°C (op.), –40° to 70°C (nonop.)

Temperature gradi-
ent (per hour max)			20°C

Relative humidity		8% to 80% (op.)
(op. and nonop.)		5% to 95% (nonop.)

Image 11

Contents Product Manual Page Product Manual Page Contents ATA interface Figures Viii Medalist 17242, 13032, 10232, 8422 and 4312, Rev. a Introduction Specification summary table ST317242A ST313032A Relative humidity Gradient Formatted capacity Default logical geometryDrive Guaranteed Mbytes Bytes per Model LBA ModeDrive Model Read/Write heads MR Number of discs Supported CHS translation geometriesPhysical organization Recording and interface technologyST317242A, ST313032A Physical characteristicsDrive Specification ST310232A, ST38422A ST34312A Seek timeRead Write Seek type Msec, typ Power specificationsPower consumption Start/stop timesTypical current profile Mode Typical Watts RMS Typical Amps RMS 12VVoltage tolerance Power-management modesMode Heads Spindle Buffer Conducted noiseHumidity 3.1 Relative Humidity Environmental tolerances Ambient temperatureTemperature gradient 3.2 Wet bulb temperatureNonoperating shock AltitudeShock Operating shockElectromagnetic susceptibility Typical sound Maximum sound Mode Power belsNonoperating vibration Drive acousticsAustralian C-Tick Agency certification Safety certificationReliability Electromagnetic CompatibilityFCC verification Medalist 17242, 13032, 10232, 8422 and 4312, Rev. a Jumper settings Master/slave configuration Handling and static-discharge precautionsUltra ATA/66 cable Alternate capacity jumperDrive mounting Alternate capacity and master/slave jumper settingsMounting dimensions-top, side and end view Medalist 17242, 13032, 10232, 8422 and 4312, Rev. a ATA interface ATA interface signals and connector pinsO pins and supported ATA signals Code ATA Interface commands Supported ATA commandsCommand name Supported by ATA-standard commandsATA-standard power-management commands Word Description Value Identify Drive commandWord Description 60-61 Total number of user-addressable Description if bit is set to Bit Word 0CH Set Features commandVendor-specific Yes 4 S.M.A.R.T. commandsA.R.T. Enable/Disable Attribute Yes Autosave A.R.T. Read Data YesD3H Medalist 17242, 13032, 10232, 8422 and 4312, Rev. a Medalist 17242, 13032, 10232, 8422 and 4312, Rev. a