Seagate Medalist 17242 manual Description if bit is set to Bit Word

Page 37

Medalist 17242, 13032, 10232, 8422 and 4312, Rev. A			29

Word	Description		Value


86	Command sets enabled		0001H

87	Command sets enable extension		4000H

88	Ultra DMA support and current mode		xx1FH

89	Security erase time		0000H

90	Enhanced security erase time		0000H

91–127	ATA-reserved		0000H

128	Security status		0000H

129–159	Seagate-reserved		xxxxH

160–255	ATA-reserved		0000H

Note. See the bit descriptions below for words 63, 88 and 93 of the Identify Drive data:

Description (if bit is set to 1)

Bit Word 63

0Multiword DMA mode 0 is supported.

1Multiword DMA mode 1 is supported.

2Multiword DMA mode 2 is supported.

8Multiword DMA mode 0 is currently active.

9Multiword DMA mode 1 is currently active.

10Multiword DMA mode 2 is currently active.

Bit Word 88

0Ultra DMA mode 0 is supported.

1Ultra DMA mode 1 is supported.

2Ultra DMA mode 2 is supported.

3Ultra DMA mode 3 is supported.

4Ultra DMA mode 4 is supported.

Image 37

Contents Product Manual Page Product Manual Page Contents ATA interface Figures Viii Medalist 17242, 13032, 10232, 8422 and 4312, Rev. a Introduction Specification summary table ST317242A ST313032A Relative humidity Gradient Drive Guaranteed Mbytes Bytes per Model Default logical geometryLBA Mode Formatted capacityPhysical organization Supported CHS translation geometriesRecording and interface technology Drive Model Read/Write heads MR Number of discsDrive Specification ST310232A, ST38422A ST34312A Physical characteristicsSeek time ST317242A, ST313032APower consumption Power specificationsStart/stop times Read Write Seek type Msec, typTypical current profile Mode Typical Watts RMS Typical Amps RMS 12VMode Heads Spindle Buffer Power-management modesConducted noise Voltage toleranceTemperature gradient Environmental tolerances Ambient temperature3.2 Wet bulb temperature Humidity 3.1 Relative HumidityShock AltitudeOperating shock Nonoperating shockNonoperating vibration Typical sound Maximum sound Mode Power belsDrive acoustics Electromagnetic susceptibilityReliability Agency certification Safety certificationElectromagnetic Compatibility Australian C-TickFCC verification Medalist 17242, 13032, 10232, 8422 and 4312, Rev. a Jumper settings Master/slave configuration Handling and static-discharge precautionsUltra ATA/66 cable Alternate capacity jumperDrive mounting Alternate capacity and master/slave jumper settingsMounting dimensions-top, side and end view Medalist 17242, 13032, 10232, 8422 and 4312, Rev. a ATA interface ATA interface signals and connector pinsO pins and supported ATA signals Command name Supported by ATA Interface commands Supported ATA commandsATA-standard commands CodeATA-standard power-management commands Word Description Value Identify Drive commandWord Description 60-61 Total number of user-addressable Description if bit is set to Bit Word 0CH Set Features commandA.R.T. Enable/Disable Attribute Yes Autosave 4 S.M.A.R.T. commandsA.R.T. Read Data Yes Vendor-specific YesD3H Medalist 17242, 13032, 10232, 8422 and 4312, Rev. a Medalist 17242, 13032, 10232, 8422 and 4312, Rev. a