Seagate ST91608220AS, ST9808212AS, ST9608210AS, ST91208220AS Configuring and mounting the drive

Page 27

3.0Configuring and mounting the drive

This section contains the specifications and instructions for configuring and mounting the drive.

3.1Handling and static-discharge precautions

After unpacking, and before installation, the drive may be exposed to potential handling and electrostatic dis- charge (ESD) hazards. Observe the following standard handling and static-discharge precautions:

Caution:

•Keep the drive in the electrostatic discharge (ESD) bag until you are ready for installation to limit the drive’s exposure to ESD.

•Before handling the drive, put on a grounded wrist strap, or ground yourself frequently by touching the metal chassis of a computer that is plugged into a grounded outlet. Wear a grounded wrist strap throughout the entire installation procedure.

•Handle the drive only by its edges or frame.

•The drive is fragile—handle it with care. Do not press down on the drive top cover.

•Always rest the drive on a padded, antistatic surface until you mount it in the computer.

•Do not touch the connector pins or the printed circuit board.

•Do not remove the factory-installed labels from the drive or cover them with additional labels. Removal voids the warranty. Some factory-installed labels contain information needed to service the drive. Other labels are used to seal out dirt and contamination.

Momentus 5400.3 PSD SATA Product Manual, Rev. A

19

Page 26 Page 28
Image 27
Page 26 Page 28
Contents 100454328 Rev. a Momentus 5400.3 PSD SataPage Revision status summary sheet Rev. a 04/13/07 Initial releaseRevision Date Momentus 5400.3 PSD Sata Product Manual, Rev. a Contents Momentus 5400.3 PSD Sata Product Manual, Rev. a List of Figures Page Introduction About the Serial ATA interface Non-volatile cache NVCImprove performance Provide power savings and battery life Improve reliabilityReduced acoustics Momentus 5400.3 PSD Sata Product Manual, Rev. a Drive specifications Specification summary tableDrive specifications summary Tem will display the warranty information for your drive Cylinders Read/write heads Sectors per track 16,383 Default logical geometryLBA mode Formatted capacityPhysical characteristics Physical organizationRecording and interface technology Typical seek times msec Read Write Seek timeStart/stop times Typical seek timesPower specifications Voltage tolerance Typical current profileDeferred spinup Conducted noiseIdle mode Power-management modesPower management modes Active modeEnvironmental specifications Vibration ShockOperating shock Nonoperating shockRadio frequency environments AcousticsElectromagnetic immunity Drive level acousticsAgency certification Safety certificationMeasurement type Specification ReliabilityKorean RRL Australian C-Tick N176FCC verification Environmental protection Corrosive environmentEuropean Union Restriction of Hazardous Substances RoHS Handling and static-discharge precautions Configuring and mounting the driveSerial ATA cables and connectors Configuring the driveDrive mounting Mounting dimensions-top, side and end viewMomentus 5400.3 PSD Sata Product Manual, Rev. a Segment Pin Function Definition Serial ATA connector pin definitionsSignal Serial ATA Sata interfaceP10 Ground 2nd mate P11 Reserved Pin Function DefinitionCommand name Command code in hex ATA-standard commands Supported ATA commandsATA-standard power-management commands Command name Command code in hexNon-volitile cache commands Word Description Value Identify Device commandXx07H Bit Word Description if bit is set to Bit WordSet Features command values Set Features command3 S.M.A.R.T. commands A.R.T. commandsCode in features register A.R.T. command Technical Support Seagate Technology support servicesInternet Presales SupportWarranty Service Data Recovery Services Authorized Service CentersData Recovery Services Call Center Toll-free Direct dial Index ITE Sata Momentus 5400.3 PSD Sata Product Manual, Rev. a Page Seagate Technology LLC

ST91608220AS, ST9608210AS, ST91208220AS, ST9808212AS, ST91008220AS specifications

Seagate is a renowned name in the data storage industry, offering high-quality hard disk drives that cater to various needs. Among its product lineup, the Seagate ST91008220AS, ST9808212AS, ST91208220AS, ST9608210AS, and ST91608220AS are significant models that showcase the company’s commitment to innovation and performance.

The ST91008220AS is a 1TB drive with a 7200 RPM rotational speed, designed primarily for desktop computers. Its SATA 3 Gb/s interface facilitates faster data transfer rates, making it ideal for users who require additional storage without sacrificing performance. The drive’s 32 MB cache enhances read and write speeds, ensuring swift access to files and applications.

Next in line, the ST9808212AS is also a 7200 RPM drive, but it offers a capacity of 80GB. This model is tailored more for entry-level systems, where space is limited but reliability is crucial. With its efficient data management features, it provides a robust solution for everyday computing tasks.

The ST91208220AS offers a balanced combination of performance and capacity, packing 120GB of storage into a similar 7200 RPM design. This model is well-suited for general use in both desktop and gaming environments, providing ample space for operating systems, applications, and games without compromising on speed.

For users seeking a high-performance option, the ST9608210AS stands out with its 600GB storage capacity. With a rotation speed of 10000 RPM, this drive is tailored for demanding applications such as video editing and gaming, where fast access to data is essential. Its SAS interface allows for even more efficient data management in enterprise environments.

Lastly, the ST91608220AS is another 160GB option, also designed for environments that demand high performance. This drive's enhanced reliability features, such as error correction and thermal management, allow it to excel in heavy-use conditions.

All these models include key technologies like Seagate’s SmartAlign, which helps users transition to advanced formatting with ease, and Adaptive Differential Encoding, enhancing data integrity. Additionally, these drives support a variety of platforms and systems, making them versatile options for consumers and businesses alike.

In summary, the Seagate ST91008220AS, ST9808212AS, ST91208220AS, ST9608210AS, and ST91608220AS are primed for diverse storage needs, delivering excellent performance and reliability across different applications and environments. Their combination of rotational speeds, cache sizes, and advanced technologies ensures that Seagate remains a leader in the hard drive market.
Top Page Image Contents