Seagate ST91008220AS, ST9808212AS manual Reliability, Agency certification, Safety certification

Page 24

2.13

Reliability

 

 

 

Measurement type

Specification

 

 

Nonrecoverable read errors

1 per 1014 bits read, max.

Annualized Failure Rate (AFR)

<0.50%

 

 

Load/Unload (U/UL)

 

25°C, 50% relative humidity

600,000 software-controlled power on/off cycles

 

 

20,000 hard power on/off cycles

32°C, 80% relative humidity

600,000 software-controlled power on/off cycles

5°C, 80% relative humidity

20,000 hard power on/off cycles

5°C, 10% relative humidity

 

55°C, 16% relative humidity

 

 

 

 

Warranty

 

5 years on distribution units.

 

 

To determine the warranty for a specific drive, use a web browser to access the

 

 

following web page:

 

 

www.seagate.com/support/service/

 

 

From this page, click on the “Verify Your Warranty” link. You will be asked to pro-

 

 

vide the drive serial number, model number (or part number) and country of pur-

 

 

chase. The system will display the warranty information for your drive.

 

 

 

2.14Agency certification

2.14.1Safety certification

The drives are recognized in accordance with UL 1950 and CSA C22.2 (950) and meet all applicable sections of IEC950 and EN 60950 as tested by TUV North America.

2.14.2Electromagnetic compatibility

Hard drives that display the CE mark comply with the European Union (EU) requirements specified in the Elec- tromagnetic Compatibility Directive (89/336/EEC). Testing is performed to the levels specified by the product standards for Information Technology Equipment (ITE). Emission levels are defined by EN 55022, Class B and the immunity levels are defined by EN 55024.

Seagate uses an independent laboratory to confirm compliance with the EC directives specified in the previous paragraph. Drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with the directives when used in the test systems, we cannot guarantee that all systems will comply with the directives. The drive is designed for operation inside a properly designed enclosure, with properly shielded I/O cable (if necessary) and terminators on all unused I/O ports. Computer manufacturers and system integrators should confirm EMC compliance and provide CE marking for their products.

16

Momentus 5400.3 PSD SATA Product Manual, Rev. A

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Momentus 5400.3 PSD Sata 100454328 Rev. aPage Revision status summary sheet Rev. a 04/13/07 Initial releaseRevision Date Momentus 5400.3 PSD Sata Product Manual, Rev. a Contents Momentus 5400.3 PSD Sata Product Manual, Rev. a List of Figures Page Introduction About the Serial ATA interface Non-volatile cache NVCImprove performance Provide power savings and battery life Improve reliabilityReduced acoustics Momentus 5400.3 PSD Sata Product Manual, Rev. a Drive specifications Specification summary tableDrive specifications summary Tem will display the warranty information for your drive Default logical geometry LBA modeFormatted capacity Cylinders Read/write heads Sectors per track 16,383Physical characteristics Physical organizationRecording and interface technology Seek time Start/stop timesTypical seek times Typical seek times msec Read WritePower specifications Typical current profile Deferred spinupConducted noise Voltage tolerancePower-management modes Power management modesActive mode Idle modeEnvironmental specifications Shock Operating shockNonoperating shock VibrationAcoustics Electromagnetic immunityDrive level acoustics Radio frequency environmentsSafety certification Measurement type SpecificationReliability Agency certificationKorean RRL Australian C-Tick N176FCC verification Environmental protection Corrosive environmentEuropean Union Restriction of Hazardous Substances RoHS Configuring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsMounting dimensions-top, side and end view Drive mountingMomentus 5400.3 PSD Sata Product Manual, Rev. a Serial ATA connector pin definitions SignalSerial ATA Sata interface Segment Pin Function DefinitionPin Function Definition P10 Ground 2nd mate P11 ReservedSupported ATA commands Command name Command code in hex ATA-standard commandsCommand name Command code in hex ATA-standard power-management commandsNon-volitile cache commands Identify Device command Word Description ValueXx07H Description if bit is set to Bit Word Bit WordSet Features command Set Features command values3 S.M.A.R.T. commands A.R.T. commandsCode in features register A.R.T. command Seagate Technology support services InternetPresales Support Technical SupportWarranty Service Data Recovery Services Authorized Service CentersData Recovery Services Call Center Toll-free Direct dial Index ITE Sata Momentus 5400.3 PSD Sata Product Manual, Rev. a Page Seagate Technology LLC

ST91608220AS, ST9608210AS, ST91208220AS, ST9808212AS, ST91008220AS specifications

Seagate is a renowned name in the data storage industry, offering high-quality hard disk drives that cater to various needs. Among its product lineup, the Seagate ST91008220AS, ST9808212AS, ST91208220AS, ST9608210AS, and ST91608220AS are significant models that showcase the company’s commitment to innovation and performance.

The ST91008220AS is a 1TB drive with a 7200 RPM rotational speed, designed primarily for desktop computers. Its SATA 3 Gb/s interface facilitates faster data transfer rates, making it ideal for users who require additional storage without sacrificing performance. The drive’s 32 MB cache enhances read and write speeds, ensuring swift access to files and applications.

Next in line, the ST9808212AS is also a 7200 RPM drive, but it offers a capacity of 80GB. This model is tailored more for entry-level systems, where space is limited but reliability is crucial. With its efficient data management features, it provides a robust solution for everyday computing tasks.

The ST91208220AS offers a balanced combination of performance and capacity, packing 120GB of storage into a similar 7200 RPM design. This model is well-suited for general use in both desktop and gaming environments, providing ample space for operating systems, applications, and games without compromising on speed.

For users seeking a high-performance option, the ST9608210AS stands out with its 600GB storage capacity. With a rotation speed of 10000 RPM, this drive is tailored for demanding applications such as video editing and gaming, where fast access to data is essential. Its SAS interface allows for even more efficient data management in enterprise environments.

Lastly, the ST91608220AS is another 160GB option, also designed for environments that demand high performance. This drive's enhanced reliability features, such as error correction and thermal management, allow it to excel in heavy-use conditions.

All these models include key technologies like Seagate’s SmartAlign, which helps users transition to advanced formatting with ease, and Adaptive Differential Encoding, enhancing data integrity. Additionally, these drives support a variety of platforms and systems, making them versatile options for consumers and businesses alike.

In summary, the Seagate ST91008220AS, ST9808212AS, ST91208220AS, ST9608210AS, and ST91608220AS are primed for diverse storage needs, delivering excellent performance and reliability across different applications and environments. Their combination of rotational speeds, cache sizes, and advanced technologies ensures that Seagate remains a leader in the hard drive market.
Top Page Image Contents