Seagate ST9808212AS, ST9608210AS manual Formatted capacity, Default logical geometry, LBA mode

Page 15

**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.

***Typical notebooks will pull power to the drive when entering S3 and S4; while in the S3 and S4 states, drive sleep and drive standby modes will not contribute to battery power consumption.

2.2Formatted capacity

Model

Formatted capacity*

Guaranteed sectors

Bytes per sector

 

 

 

 

ST91608220AS

160 Gbytes

312,581,808

512

 

 

 

 

ST91208220AS

120 Gbytes

234,441,648

512

 

 

 

 

ST91008220AS

100 Gbytes

195,371,568

512

 

 

 

 

ST9808212AS

80 Gbytes

156,301,488

512

 

 

 

 

ST9608210AS

60 Gbytes

117,210,240

512

 

 

 

 

*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.

2.2.1LBA mode

When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1,where n is the number of guaranteed sectors as defined above.

See Section 4.3.1, "Identify Device command" (words 60-61 and 100-103) for additional information about 48- bit addressing support of drives with capacities over 137 Gbytes.

2.3Default logical geometry

Cylinders

Read/write heads

Sectors per track

 

 

 

16,383

16

63

 

 

 

Momentus 5400.3 PSD SATA Product Manual, Rev. A

7

Page 14 Page 16
Image 15
Page 14 Page 16
Contents 100454328 Rev. a Momentus 5400.3 PSD SataPage Revision status summary sheet Rev. a 04/13/07 Initial releaseRevision Date Momentus 5400.3 PSD Sata Product Manual, Rev. a Contents Momentus 5400.3 PSD Sata Product Manual, Rev. a List of Figures Page Introduction About the Serial ATA interface Non-volatile cache NVCImprove performance Provide power savings and battery life Improve reliabilityReduced acoustics Momentus 5400.3 PSD Sata Product Manual, Rev. a Drive specifications Specification summary tableDrive specifications summary Tem will display the warranty information for your drive Cylinders Read/write heads Sectors per track 16,383 Default logical geometryLBA mode Formatted capacityPhysical characteristics Physical organizationRecording and interface technology Typical seek times msec Read Write Seek timeStart/stop times Typical seek timesPower specifications Voltage tolerance Typical current profileDeferred spinup Conducted noiseIdle mode Power-management modesPower management modes Active modeEnvironmental specifications Vibration ShockOperating shock Nonoperating shockRadio frequency environments AcousticsElectromagnetic immunity Drive level acousticsAgency certification Safety certificationMeasurement type Specification ReliabilityKorean RRL Australian C-Tick N176FCC verification Environmental protection Corrosive environmentEuropean Union Restriction of Hazardous Substances RoHS Handling and static-discharge precautions Configuring and mounting the driveSerial ATA cables and connectors Configuring the driveDrive mounting Mounting dimensions-top, side and end viewMomentus 5400.3 PSD Sata Product Manual, Rev. a Segment Pin Function Definition Serial ATA connector pin definitionsSignal Serial ATA Sata interfaceP10 Ground 2nd mate P11 Reserved Pin Function DefinitionCommand name Command code in hex ATA-standard commands Supported ATA commandsATA-standard power-management commands Command name Command code in hexNon-volitile cache commands Word Description Value Identify Device commandXx07H Bit Word Description if bit is set to Bit WordSet Features command values Set Features command3 S.M.A.R.T. commands A.R.T. commandsCode in features register A.R.T. command Technical Support Seagate Technology support servicesInternet Presales SupportWarranty Service Data Recovery Services Authorized Service CentersData Recovery Services Call Center Toll-free Direct dial Index ITE Sata Momentus 5400.3 PSD Sata Product Manual, Rev. a Page Seagate Technology LLC

ST91608220AS, ST9608210AS, ST91208220AS, ST9808212AS, ST91008220AS specifications

Seagate is a renowned name in the data storage industry, offering high-quality hard disk drives that cater to various needs. Among its product lineup, the Seagate ST91008220AS, ST9808212AS, ST91208220AS, ST9608210AS, and ST91608220AS are significant models that showcase the company’s commitment to innovation and performance.

The ST91008220AS is a 1TB drive with a 7200 RPM rotational speed, designed primarily for desktop computers. Its SATA 3 Gb/s interface facilitates faster data transfer rates, making it ideal for users who require additional storage without sacrificing performance. The drive’s 32 MB cache enhances read and write speeds, ensuring swift access to files and applications.

Next in line, the ST9808212AS is also a 7200 RPM drive, but it offers a capacity of 80GB. This model is tailored more for entry-level systems, where space is limited but reliability is crucial. With its efficient data management features, it provides a robust solution for everyday computing tasks.

The ST91208220AS offers a balanced combination of performance and capacity, packing 120GB of storage into a similar 7200 RPM design. This model is well-suited for general use in both desktop and gaming environments, providing ample space for operating systems, applications, and games without compromising on speed.

For users seeking a high-performance option, the ST9608210AS stands out with its 600GB storage capacity. With a rotation speed of 10000 RPM, this drive is tailored for demanding applications such as video editing and gaming, where fast access to data is essential. Its SAS interface allows for even more efficient data management in enterprise environments.

Lastly, the ST91608220AS is another 160GB option, also designed for environments that demand high performance. This drive's enhanced reliability features, such as error correction and thermal management, allow it to excel in heavy-use conditions.

All these models include key technologies like Seagate’s SmartAlign, which helps users transition to advanced formatting with ease, and Adaptive Differential Encoding, enhancing data integrity. Additionally, these drives support a variety of platforms and systems, making them versatile options for consumers and businesses alike.

In summary, the Seagate ST91008220AS, ST9808212AS, ST91208220AS, ST9608210AS, and ST91608220AS are primed for diverse storage needs, delivering excellent performance and reliability across different applications and environments. Their combination of rotational speeds, cache sizes, and advanced technologies ensures that Seagate remains a leader in the hard drive market.
Top Page Image Contents