Nikon SB-28 instruction manual Repeating Flash Mode, For cameras in all groups, Flash settings

Repeating Flash " Mode

For cameras in all groups

In the " mode, the SB-28 fires repeatedly during a single exposure, creating stroboscopic multiple-exposure effects. This mode is useful when shooting fast-moving subjects.

Flash settings

1 Select the flash mode.

—Press the µ button until ƒ " appear on the LCD panel.

2Set the flash output level, the frequency (Hz), and the number of repeating flashes per frame.

•Referring to the table on page 53, set the flash output level, the frequency, and the number of repeating flashes per frame separately.

—Press the [ button until the flash output level starts blinking, then press the { or } button to set the desired flash output level. Finally, press the [ button to stop the flash output level from blinking.

—Repeat the procedures above to set the frequency and the number of repeating flashes per frame.

•The numbers blink during adjustment and stop after 8 seconds unless the [ button is pressed. The non-blinking number is the one automatically set.

Frequency (Hz)

Flash output level

Number of repeating flashes

per frame

52