Nikon SB-28 instruction manual Multiple flash operation in t and ƒ flash modes

Multiple flash operation in t and ƒ flash modes

Manual multiple flash operation (For cameras in all groups)

•For speedlights which can serve as secondary flash units, see the System chart for TTL multiple flash on pages 68–69.

1Connect the SB-28 to the sync terminal of the secondary flash unit(s) using a cord.

Usable optional remote cords:

Use the sync terminals for connecting the SB-28 with other flash units via the Sync Cord SC-11/SC-15, or TTL Multi-Flash Sync Cord SC-18/SC-19.

2Set the flash mode of all the flash units to Manual ƒ.

3Set the zoom-head position and the flash-to-subject distance of the main flash unit and secondary unit(s).

•First set the zoom-head position and the flash-to-subject shooting distance of the main flash unit, then on the secondary unit(s).

•To calculate the maximum number of flash units that can be connected, see page 65.

4Follow the same procedure as in normal Manual flash ƒ mode.

•For applicable guide numbers in Manual ƒ mode for each flash output level

at each zoom-head position, see pages 56-57, Guide Numbers for determining correct aperture in ƒ and " modes.

70