Nikon instruction manual Attaching the SB-28to the camera, Detaching the SB-28

Attaching the SB-28 to the camera

When attaching the SB-28 to your camera, make sure both units are turned off to avoid accidentally firing the flash.

1Loosen the SB-28's mounting foot locking wheel and slide the SB-28 into the camera’s accessory shoe.

2Tighten the locking wheel.

With cameras equipped with a safety lock system, the mount pin is automatically inserted into the locking hole in the camera’s accessory shoe to secure the SB-28.

Detaching the SB-28

•To detach the SB-28, loosen the mounting foot locking wheel all the way. If the wheel doesn’t loosen easily, push the foot forward gently

14in the direction of the white arrow and try loosening the wheel again.