Using control buttons
By pressing a single button, you can activate frequently used functions. When two buttons are pressed simultaneously, you can activate functions which are not necessary to set each time. For easy reference, refer to the chart on the back of the
| M ZOOM ONLY |
|
| |
ZOOM | MODE | SEL | + | - |
|
| NO AF ILL |
| |
|
| ON/STBY |
|
|
|
| (m) / (ft) | ON/OFF |
|
FLASH |
|
|
|
One-button operations
'To adjust the
µTo set the flash mode (P.22)
[To select and set various functions and values
{To increase values
}To decrease values
~To test fire the flash (P.17)
.To illuminate the LCD panel (P.5)
=To turn power on and off (P.15)
Two-button operations
' + { | To set or cancel automatic |
| pressed for 2 sec.) |
'+ [ To readjust the
µ + } | To turn the AF assist illuminator LED on or off |
µ+ = To cancel or set the standby function (Buttons must be pushed after the flash is turned off.) (P.15)
.+ = To select the distance scale (meters or feet) (P.13) (Buttons must be pushed after the flash is turned off.)
10