Nikon SB-28 Multiple flash operation in t and ƒ flash modes, TTL multiple flash operation

Multiple flash operation in t and ƒ flash modes

TTL multiple flash operation

Cameras in Groups I through VI and F3-Series

1Attach the main flash unit to the camera’s accessory shoe.

•To use the SB-28 off-camera, refer to pages 68-69, System chart for TTL multiple flash, for the correct type of optional TTL Remote Cord to use.

2Set the flash mode of the master flash unit to t mode.

•To obtain the correct exposure with the SB-28 when used as the main flash

and set to 3D Multi-Sensor Balanced Fill-Flash, cancel Monitor Preflash on the main flash unit by pressing the µ button until t appears on the LCD panel.

3 Connect the main flash unit to the secondary flash unit(s).

—Use one or more TTL Remote Cords SC-18 or SC-19 to connect the SB-28 to the secondary flash unit(s) in series.

•Turn off all flash units before connecting.

•Use Multi-Flash Adapter AS-10 when using more than three flash units for TTL multiple flash operation, or if the secondary flash units are not equipped with multiple flash terminals.

•Use Tripod Adapter AS-11 to attach the SB-16A or SB-17 to a tripod.

66